Groundwater in Burleson County contains iron, manganese, chloride, lead, nitrate, and sulfate. Several of these contaminants exceed EPA health standards, making them a concern for well owners in this area.
The rocks beneath Burleson County naturally release iron and manganese into groundwater as water moves slowly through them over time. Chloride and sulfate get into the water from the same rock layers and also from saltwater that sits deeper underground in coastal areas. Nitrate comes from fertilizer and septic systems in the county. These sources combine to create the mix of contaminants found here.
Groundwater in this county is moderately hard, driven mainly by elevated sodium and moderate iron levels from the rock formations below. The coastal uplands aquifer system in this area contains rock types that naturally contribute these minerals as water flows through them. Most wells across the county show similar mineral characteristics, reflecting the uniform geology of the region.
Wells in Burleson County sometimes have several contaminants above EPA health limits. Lead can damage children's brains and kidneys even at low levels. Nitrate and chloride at elevated levels can harm infants and people with certain health conditions. Iron and manganese in high amounts can affect the nervous system, especially in children. These concerns deserve attention even when levels aren't extremely high.
The mineral content in county wells creates everyday problems for families. Iron causes orange or brown staining on sinks, toilets, and laundry. Manganese leaves dark brown or black stains. High sodium gives water a salty taste that some people notice right away. The moderately hard water can leave scale buildup in pipes and on fixtures, and it shortens the life of water heaters and dishwashers.
We recommend testing your well water through a comprehensive panel since multiple contaminants exceed health standards in this county. Every well is different--your water could have much higher or lower levels than what is common here. Testing is the only way to know what is actually in your well so you can treat it properly. A comprehensive metals and minerals panel typically costs between $200 and $400. Reverse osmosis filters or whole-house treatment systems can address multiple concerns at once.
Not sure if your well is affected? Get certified results in 5–7 days.
Test Your Well Water with Tap Score →| Contaminant | Samples ⓘ | % Above MCL ⓘ | Distribution ⓘ | Confidence ⓘ | Risk ⓘ |
|---|---|---|---|---|---|
| Iron | 257 | 37% | High | High | |
| Manganese | 93 | 26% | Moderate | High | |
| Chloride | 95 | 22% | Moderate | High | |
| Sulfate | 95 | 16% | Moderate | High | |
| Nitrate | 119 | 3% | High | Low | |
| Lead | 92 | 1% | Moderate | Low | |
| Arsenic | 92 | 0% | Moderate | Low | |
| Fluoride | 409 | 0% | High | Low | |
| HFPO-DA (GenX) ⓘ municipal | 4 | 0% | Low | Safe ⓘ | |
| Nitrite | 2 | 0% | Low | Safe ⓘ | |
| PFHxS ⓘ municipal | 4 | 0% | Low | Safe ⓘ | |
| PFNA ⓘ municipal | 4 | 0% | Low | Safe ⓘ | |
| PFOA ⓘ municipal | 4 | 0% | Low | Safe ⓘ | |
| PFOS ⓘ municipal | 4 | 0% | Low | Safe ⓘ | |
| Radon | 1 | 0% | Low | Low ⓘ | |
| Uranium | 19 | 0% | Moderate | Low | |
| Sodium | 95 | — | Moderate | Low | |
| pH | 91 | — | Moderate | Low | |
| PFBS ⓘ municipal | 4 | — | Low | Safe ⓘ | |
| Hardness | 95 | — | Moderate | Low |
MCL = Maximum Contaminant Level (EPA limit for public water; used as benchmark for private wells). Distribution shows % of sampled wells in each concentration band. Methodology.
* Microbial contaminants (E. coli, coliform) reflect only samples from the last 10 years.
Data shows potential risk — a certified test confirms whether your water is affected.
Order a Tap Score Test →Population-level CDC data. Not individual risk prediction.
Loading recent water news…