Home › Washington › Snohomish County

Snohomish County, WA Wells: 16% of 287 Wells High in Arsenic

Data updated November 12, 2026. Covers private wells, not public water systems.

High Risk
Wells here often exceed a health limit Based on 287 wells tested Confidence: High
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well now →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

Fixes: If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Fixes: If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. A water softener, like the Matrixx Smart Metered Water Softener, also handles small amounts of manganese and iron. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Snohomish County, make sure the test covers:

  • Arsenic
  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Snohomish County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Arsenic 287 wells 16% High High risk

Arsenic across Washington →

Water tests from agencies

46 of 287 wells tested since 1981 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1981–2016

USGS estimate

USGS estimates about a 5% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Nitrate 18 well sites 0% Low Low risk

Nitrate across Washington →

Water tests from agencies

0 of 18 well sites tested since 2001 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2016

USGS estimate

USGS predicts typical nitrate around 0.1 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

Coliform Bacteria 2 wells 1 of 2 Low Too few tests

Water tests from agencies

1 of 2 wells tested since 2016 were positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

Lead 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 2016 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 2 wells 0 of 2 Low Too few tests
E. coli 2 wells 0 of 2 Low Too few tests
Everyday water problems
Manganese 315 wells 41% High Very common

Manganese across Washington →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

130 of 315 wells tested since 1971 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1971–2016

USGS estimate

USGS estimates about a 10% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Iron 346 well sites 20% High Common
pH 18 well sites 11% Low Common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

2 of 18 well sites tested since 2001 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2016

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Hardness 315 wells 7% High Sometimes found

Hard Water across Washington →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

23 of 315 wells tested since 1971 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1971–2016

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Chloride 18 well sites 0% Low Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 18 well sites tested since 2001 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2016

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

Sodium 2 wells 0 of 2 Low Too few tests

A salty taste at higher levels.

Water tests from agencies

0 of 2 wells tested since 2016 were above the World Health Organization's taste level of 200 parts per million; 0 of 2 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Sulfate 2 wells 0 of 2 Low Too few tests
Other substances tested
Fluoride 315 wells 0.3% High Low risk

Fluoride across Washington →

PFASacross the county USGS estimate about 22% chance Low Not rated

USGS estimate

USGS estimates about a 22% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

Less than 1% of households on private wells here (about 16 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Nitrite 2 wells 0 of 2 Low Too few tests

Nitrate across Washington →

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 27,300 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 12% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • About 21% of households on private wells here (about 5,800 homes) live within 1 mile of groundwater pollution on the state's list or a Superfund site (the EPA's list of the most serious toxic waste sites). That does not mean their wells are affected, but it is a good reason to test. Source: Washington Ecology contaminated sites list.
  • USGS maps no limestone and similar rock with cracks and caves (karst) in this county. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 3 – low potential. Source: EPA Map of Radon Zones.
  • Radon in indoor air: about 2% of homes tested here (about 170 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.
  • Since 2000, FEMA has declared 5 flood or hurricane disasters that included this county, most recently in 2026. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
  • Since 2000, at least half of this county was in drought about 16% of the time, most recently with severe drought in 2025. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Snohomish County

The only way to know what is in your well is to test it. The certified labs nearest Snohomish County are listed below. The closest is Everett Environmental Laboratory in Everett, about 20 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for arsenic, manganese and iron.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Everett Environmental Laboratory

4027 4th Street SE, Everett

About 20 miles away · 425-257-8230

Call a lab first to ask which tests it runs and how to get a sample bottle.

Every certified lab in Washington

These labs serve well owners across Snohomish County, including Alderwood Manor, Arlington, Arlington Heights, Bothell East, Bothell West, Brier, Bryant, Bunk Foss, Canyon Creek, Cathcart, Cavalero, Chain Lake, Clearview, Darrington, Eastmont, Edmonds, Esperance, Everett, Fobes Hill, Gold Bar, Granite Falls, Hat Island, High Bridge, Index, Kayak Point, Lake Bosworth, Lake Cassidy, Lake Goodwin, Lake Ketchum, Lake Roesiger, Lake Stevens, Lake Stickney, Larch Way, Lochsloy, Lynnwood, Machias, Maltby, Martha Lake, Marysville, May Creek, Meadowdale, Mill Creek, Mill Creek East, Monroe, Monroe North, Mountlake Terrace, Mukilteo, North Lynnwood, North Sultan, Northwest Stanwood, Oso, Picnic Point, Silvana, Silver Firs, Sisco Heights, Snohomish, Stanwood, Startup, Sultan, Sunday Lake, Swede Heaven, Three Lakes, Verlot, Warm Beach, Woods Creek and Woodway.

These labs are certified by Washington to test drinking water for bacteria, and most also test for nitrate. For other tests, ask the lab what it is certified for. See the state's list.

Rules about testing

  • Licensed child care programs in Washington that use a private well must test it every year for E. coli and nitrate. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Snohomish County Health Department website.

Local health departments

From the Washington State Department of Health, Washington State Local Health Jurisdictions.

Products on this page

Test first, then fix only what your test finds. Certified labs near Snohomish County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Arsenic, Nitrate, Uranium, Chloride, Sodium, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Arsenic, Nitrate, Lead, Uranium, Chloride, Sodium, Sulfate, Fluoride, PFAS, Nitrite.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Manganese, Iron, Hardness.

$4,905–$5,322

View product →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Snohomish County can test your water.

Snohomish County: High RiskTest your well now

For health departments, realtors and groups

Free ways to share what wells in Snohomish County show:

  • Add this to your website: a free card about wells in Snohomish County that updates itself.
  • Download the data behind this page for Washington. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Snohomish County, WA Wells: 16% of 287 Wells High in Arsenic," https://yourwaterreport.com/states/wa/snohomish-county/, data updated November 12, 2026.

Sources and dates

All 16 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Contaminated Sites List, Cleanup and Tank Search, Washington State Department of Ecology.

How we get our numbers · Download the data