Home › States › Washington › Manganese

Manganese in Washington Well Water

Everyday problem 25 of 36 counties where it is common in tested wells Compared with the EPA taste-and-staining guideline of 0.05 parts per million
Highest Cowlitz County 73% of 44 wells high in it
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

County by county

Every Washington county where wells were tested for manganese. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For manganese in every state we cover, see our Manganese guide.

CountyHigh in itTestedHow commonConfidence
Adams County3%60 well sitesSometimes foundModerate
Asotin County29%7 wellsVery commonLow
Benton County22%76 wellsCommonModerate
Chelan County10%19 wellsCommonLow
Clallam County0%7 wellsRareLow
Clark County20%204 wellsCommonHigh
Cowlitz County73%44 wellsVery commonModerate
Douglas County10%21 well sitesSometimes foundModerate
Ferry County0%6 wellsRareLow
Franklin County7%100 well sitesSometimes foundHigh
Garfield County0%6 wellsRareLow
Grant County2%126 wellsSometimes foundHigh
Grays Harbor County40%35 wellsVery commonModerate
Island County61%44 well sitesVery commonModerate
King County41%381 well sitesVery commonHigh
Kitsap County33%198 well sitesVery commonHigh
Kittitas County0%40 wellsRareModerate
Klickitat County12%41 wellsCommonModerate
Lewis County27%26 well sitesVery commonModerate
Lincoln County9%34 well sitesSometimes foundModerate
Mason County24%37 wellsCommonModerate
Okanogan County12%49 wellsCommonModerate
Pacific County30%46 well sitesVery commonModerate
Pend Oreille County63%19 wellsVery commonLow
Pierce County44%169 well sitesVery commonHigh
San Juan County49%37 well sitesVery commonModerate
Skagit County56%69 well sitesVery commonModerate
Skamania County0%9 well sitesRareLow
Snohomish County41%315 wellsVery commonHigh
Spokane County5%85 well sitesSometimes foundModerate
Stevens County50%199 well sitesVery commonHigh
Thurston County29%455 well sitesVery commonHigh
Walla Walla County21%28 wellsCommonModerate
Whatcom County48%168 well sitesVery commonHigh
Whitman County22%69 well sitesCommonModerate
Yakima County18%224 well sitesCommonHigh

What it does

Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Where it comes from: It comes naturally from rock underground.

How to test for manganese

A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a manganese test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.

How to remove manganese from well water

Manganese is removed the same ways as iron, and usually together with it. For most homes, an oxidizing filter (such as manganese greensand) is the usual choice; small amounts can be removed by a water softener. Manganese needs a higher pH than iron to be removed, so check your pH first. Until it's fixed, use other water for baby formula if your well is high.

Iron and manganese level (in your test)What usually works
Iron under 1 parts per millionCatalytic carbon filter (the water needs enough dissolved oxygen)
Iron under 5 parts per million, with hard waterWater softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first
Iron and manganese together, 3 to 10 parts per millionOxidizing filter (manganese greensand), cleaned with potassium permanganate
Iron and manganese together, over 10 parts per millionChlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter

In what order

  • Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
  • Treat water where it enters the house, so every tap gets it.
  • If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.

What doesn't fix it

  • A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
  • A softener isn't a filter for iron that has already turned orange: that iron fouls it.

Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.

If your own test shows manganese over the limit, these are common fixes:

An oxidizing filter or a water softener can remove it.

Got your test results?

Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.

Make a treatment plan