Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source
Nitrate: Nitrate is most dangerous for babies under 6 months. It can keep their blood from carrying enough oxygen. Use other water for baby formula if your well is high. It has no color, taste or smell. Boiling does not remove it; it makes it stronger. Source
Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source
Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.
Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.
pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source
USGS predicts typical nitrate around 0.2 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).
If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).
USGS estimates about a 16% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.
1 of 11 wells tested since 2002 were above the World Health Organization's taste level of 200 parts per million; 3 of 11 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.
If a test finds nitrite over the limit, the usual fix is the same as for Arsenic (above).
PFASacross the countyUSGS estimateabout 41% chanceLowNot rated
USGS estimate
USGS estimates about a 41% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.
Less than 1% of households on private wells here (about 140 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.
If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).
Radon3 wells0 of 3LowToo few tests
Water tests from agencies
0 of 3 wells tested since 2002 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).
How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.
Your town
Find your town
Type your town or ZIP code to see its results and find it on the map.
These results come from wells tested in a scientific survey, town by town. Pick a test to color the map, or tap a town to find it in the table.
How to read the table: each number is the share of wells tested in that town that were over the limit. The small number under it is how many wells were tested. A dash means fewer than ten wells were tested, so the state does not report it. Tap a column name to sort. Source: MassDEP private well PFAS sampling program.
Half of the private wells on record here are more than 300 feet deep, and the middle half are 200 to 420 feet deep (from 5,956 state well records). Source: U.S. Groundwater Well Database.
Half of the private wells on record here were drilled by 2004 (from 6,063 state well records). Source: U.S. Groundwater Well Database.
About 18% of households on private wells here (about 3,000 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Massachusetts DEP waste site cleanup list.
Less than 1% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Source: USGS map of limestone and similar rock.
Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
Radon in indoor air: about 13% of homes tested here (about 1,700 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.
Since 2000, FEMA has declared 5 flood or hurricane disasters that included this county, most recently in 2023. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
Since 2000, at least half of this county was in drought about 12% of the time, most recently with severe drought in 2025. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.
These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.
Well water testing in Hampden County
The only way to know what is in your well is to test it. The certified labs nearest Hampden County are listed below. The closest is Vallid Labs Inc in AGAWAM, about 5 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for arsenic and manganese.
Order a test kitTap Score Advanced Well Water Test
A mail-in test from certified labs for more than 100 substances, with results in about a week.
These labs serve well owners across Hampden County, including Agawam Town, Blandford, Chester, Chicopee, Holland, Holyoke, Longmeadow, Monson Center, Palmer Town, Russell, Springfield, West Springfield Town, Westfield and Wilbraham.
These labs are certified by Massachusetts for the tests shown. Before you order, check the state's list for the tests you need. See the state's list.
Rules about testing
Massachusetts has no state disclosure form for sellers, and the state doesn't require a well test when a home is sold. Many towns do, so ask the town's board of health. Source
Federal rules and home loans (6)
No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source
Local health codes in this state have not been reviewed yet.
Local help
For up-to-date local news about wells and water testing, check the Agawam Health Department website.
Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.
Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.
Ready to test your well?
A mail-in kit or a certified lab near Hampden County can test your water.
Download the data behind this page for Massachusetts. It is free to reuse if you credit YourWaterReport.
To cite this page: YourWaterReport, "Hampden County, MA Wells: 39% of 41 Wells High in Manganese," https://yourwaterreport.com/states/ma/hampden-county/, data updated November 12, 2026.
Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
MassDEP Tier Classified Oil and/or Hazardous Material Sites (MGL c. 21E), MassGIS.
Private Wells PFAS Sampling Program results, Massachusetts Department of Environmental Protection.
Well Driller Program well completion reports, Massachusetts Department of Environmental Protection.
The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.