Home › Massachusetts › Berkshire County

Berkshire County, MA Wells: 44% of 41 Sites High in Manganese

Data updated November 12, 2026. Covers private wells, not public water systems.

Risk Unknown
Too few health tests to rate Based on a USGS estimate Confidence: Low
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Nitrate and arsenic look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Fixes: If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese and iron. If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Berkshire County, make sure the test covers:

  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Berkshire County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Nitrateacross the county USGS estimate about 0.1 of 10 parts per million Low Low risk

USGS estimate

USGS predicts typical nitrate around 0.1 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

Water tests from agencies

0 of 2 wells tested since 2002 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenic 10 wells 0% Low Low risk

Arsenic across Massachusetts →

Water tests from agencies

0 of 10 wells tested since 1986 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2017

USGS estimate

USGS estimates about a 4% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is the same as for Nitrate (above).

Coliform Bacteria 2 wells 1 of 2 Low Too few tests

Water tests from agencies

1 of 2 wells tested since 2017 were positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2017

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

Lead 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 2002 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 3 wells 0 of 3 Low Too few tests
E. coli 2 wells 0 of 2 Low Too few tests
Everyday water problems
Hardness 42 wells 45% Moderate Very common

Hard Water across Massachusetts →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

19 of 42 wells tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2017

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Manganese 41 well sites 44% Moderate Very common

Manganese across Massachusetts →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

18 of 41 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2017

USGS estimate

USGS estimates about a 23% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Iron 43 well sites 26% Moderate Very common

Iron across Massachusetts →

Sodium 2 wells 0 of 2 Low Too few tests

A salty taste at higher levels.

Water tests from agencies

0 of 2 wells tested since 2002 were above the World Health Organization's taste level of 200 parts per million; 0 of 2 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds high sodium, the usual fix is the same as for Nitrate (above).

Chloride 2 wells 0 of 2 Low Too few tests

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 2 wells tested since 2002 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds chloride over the taste or staining level, the usual fix is the same as for Nitrate (above).

Sulfate 2 wells 0 of 2 Low Too few tests
pH 2 wells 0 of 2 Low Too few tests

pH (Acidic or Basic Water) across Massachusetts →

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

0 of 2 wells tested since 2002 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Other substances tested
PFAS (6 Added Together) 165 wells 0% High Low risk

State testing program

0% of 165 wells tested in a scientific survey (2020–2022) were above Massachusetts' limit of 20 parts per trillion for six PFAS added together.

Source: MassDEP private well PFAS sampling program, 2020–2022

Fluoride 42 wells 0% Moderate Low risk
PFASacross the county USGS estimate about 21% chance Low Not rated

USGS estimate

USGS estimates about a 21% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

Less than 1% of households on private wells here (about 110 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Nitrite 2 wells 0 of 2 Low Too few tests
Radon 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 2002 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Your town

Find your town

Type your town or ZIP code to see its results and find it on the map.

These results come from wells tested in a scientific survey, town by town. Pick a test to color the map, or tap a town to find it in the table.

How to read the table: each number is the share of wells tested in that town that were over the limit. The small number under it is how many wells were tested. A dash means fewer than ten wells were tested, so the state does not report it. Tap a column name to sort. Source: MassDEP private well PFAS sampling program.

Town
Alford
Becket
Clarksburg
Florida
Monterey
New Ashford
New Marlborough
Otis
Peru
Richmond
Sandisfield
Savoy
Tyringham
Washington
Windsor

About wells here

  • About 21,600 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 17% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 300 feet deep, and the middle half are 220 to 420 feet deep (from 6,958 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 2002 (from 6,933 state well records). Source: U.S. Groundwater Well Database.
  • About 22% of households on private wells here (about 4,800 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Massachusetts DEP waste site cleanup list.
  • About 30% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Another 1% has this kind of rock buried deeper underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 27% of homes tested here (about 760 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Since 2000, FEMA has declared 5 flood or hurricane disasters that included this county, most recently in 2023. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
  • Since 2000, at least half of this county was in drought about 9% of the time, most recently with severe drought in 2024. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Berkshire County

The only way to know what is in your well is to test it. The certified labs nearest Berkshire County are listed below. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for manganese and iron.

No certified lab is within 30 miles of Berkshire County. These are the closest. Many labs also take samples by mail: ask the lab for a kit.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Closest certified lab Vallid Labs Inc

295 SILVER ST, AGAWAM

About 36 miles away · 413-789-2206

Certified for bacteria tests

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Berkshire County

Certified lab Quabbin Analytical Laboratory

9 STADLER ST, BELCHERTOWN

About 41 miles away · 413-323-7134

Certified for bacteria tests

Certified lab Eurofins Ayer

31A WILLOW RD, AYER

About 86 miles away · 978-391-4428

Certified for bacteria tests

Every certified lab in Massachusetts

These labs serve well owners across Berkshire County, including Adams, Cheshire, Great Barrington, Housatonic, Lee, Lenox, Lenox Dale, North Adams, Pittsfield and Williamstown.

These labs are certified by Massachusetts for the tests shown. Before you order, check the state's list for the tests you need. See the state's list.

Rules about testing

  • Massachusetts has no state disclosure form for sellers, and the state doesn't require a well test when a home is sold. Many towns do, so ask the town's board of health. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Adams Board of Health website.

Local health departments

From the Mass.gov, Massachusetts city and town websites.

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Berkshire County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Nitrate, Arsenic, Uranium, Sodium, Chloride, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Nitrate, Arsenic, Lead, Uranium, Sodium, Chloride, Sulfate, Fluoride, PFAS, Nitrite.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Manganese, Iron.

$4,905–$5,322

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Berkshire County can test your water.

Berkshire County: Risk UnknownTest your well

For health departments, realtors and groups

Free ways to share what wells in Berkshire County show:

  • Add this to your website: a free card about wells in Berkshire County that updates itself.
  • Download the data behind this page for Massachusetts. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Berkshire County, MA Wells: 44% of 41 Sites High in Manganese," https://yourwaterreport.com/states/ma/berkshire-county/, data updated November 12, 2026.

Sources and dates

All 19 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • MassDEP Tier Classified Oil and/or Hazardous Material Sites (MGL c. 21E), MassGIS.
  • Private Wells PFAS Sampling Program results, Massachusetts Department of Environmental Protection.
  • Well Driller Program well completion reports, Massachusetts Department of Environmental Protection.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data