Home › What your test results mean

What Do My Well Water Test Results Mean?

Your lab report lists each thing tested, how much was found and, usually, a limit to compare it with. Here is how to read it and what to do next.

Over a health limit Act now Use other water for drinking, cooking and baby formula until it is fixed, and test again after.
Over a taste or staining level Not urgent Stains, scale and taste are a nuisance, not a health risk. High manganese is the exception for babies.
Not found, or under the limit Good news for now. Test again every year for bacteria and nitrate, and after any change. How to test your well

Make a treatment plan from your results

Type in the numbers from your lab report. You'll get what each result means, what to fix first and why, and what you don't need to buy.

Your numbers stay in your browser. We don't save or send them.

Where is your well?

Optional. We'll add what tests found near you, and the tests that are common there.

Bacteria

Your report may say "present" or "absent", "positive" or "negative", or give a count.

Total coliform bacteria
E. coli
Stains, taste and scale

Leave a box empty if your lab didn't test it.

Hardness can be given in parts per million or grains per gallon; pick the unit your report uses.

Health tests

Results under the lowest amount the lab can measure are often written "<" or "ND" (not detected). Type it as written, like <0.5 or ND.

More tests (fluoride, sodium, chloride, sulfate, radon (in water), PFOA, PFOS)
More tests
pCi/L (picocuries per liter)
No lab report yet? Here's what to test for.

The limit for each result

Compare each result with its limit, in the same units. Health limits protect your health; taste and staining levels are about how water looks and tastes. Some states set stricter limits than the EPA: your county page names the limit used there.

SubstanceLimitKind
ArsenicThe EPA limit of 10 parts per billionHealth
NitrateThe EPA limit of 10 parts per million (as nitrogen)Health
NitriteThe EPA limit of 1 part per million (as nitrogen)Health
Coliform BacteriaAny presenceHealth
E. coliAny presenceHealth
PFAS ("Forever Chemicals")The EPA limit of 4 parts per trillionHealth
LeadThe EPA action level of 15 parts per billionHealth
UraniumThe EPA limit of 30 parts per billionHealth
Radium and Natural RadioactivityThe EPA limit for natural radioactivity (15 picocuries per liter)Health
RadonThe higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit)Health
FluorideThe EPA limit of 4 parts per millionHealth
MercuryThe EPA limit of 2 parts per billionHealth
IronThe EPA taste-and-staining guideline of 0.3 parts per millionEveryday
ManganeseThe EPA taste-and-staining guideline of 0.05 parts per millionEveryday
Hard WaterThe USGS level for hard water (120 parts per million)Everyday
pH (Acidic or Basic Water)The recommended pH range (6.5 to 8.5)Everyday
AtrazineThe EPA limit of 3 parts per billionHealth
ChromiumThe EPA limit of 100 parts per billionHealth
Hexavalent ChromiumCalifornia's limit of 10 parts per billion (no separate EPA limit)Health
CopperThe EPA action level of 1.3 parts per millionHealth
Trichloroethylene (TCE)The EPA limit of 5 parts per billionHealth

If something is over the limit

Bacteria

E. coli found: E. coli comes from human or animal waste. It can cause diarrhea, cramps and vomiting, and is most dangerous for young children, older adults and people who are sick. Don't drink the water until it is fixed; boiling it for 1 minute makes it safe to drink. Find and fix the source, disinfect the well (shock chlorination), and test again. An ultraviolet (UV) light can treat it. Source

Coliform bacteria found, but no E. coli: Coliform bacteria usually don't make people sick themselves, but finding them means germs from the surface can get into your well. Find and fix how water gets in, then disinfect the well (shock chlorination). An ultraviolet (UV) light treats water that keeps testing positive.

Nitrate

Nitrate is most dangerous for babies under 6 months. It can keep their blood from carrying enough oxygen. Use other water for baby formula if your well is high. It has no color, taste or smell. Boiling does not remove it; it makes it stronger. Reverse osmosis or an ion exchange filter can remove it. Fixing the source, like a nearby septic system, helps too. Source

Arsenic, lead, uranium, PFAS and other health limits

Until it is fixed, use bottled water, or water from a filter certified for that substance, for drinking, cooking and baby formula. Bathing and washing are usually fine for arsenic, lead, uranium and PFAS. Radon is different: it gets into the air when water runs, so see the radon guide. Each contaminant guide explains the common fixes; a test after the fix shows whether it worked.

Iron, manganese, hardness and other everyday problems

These cause stains, scale and bad taste but are not a health risk, so they are not urgent. The exception is manganese. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. A water softener or a filter usually fixes them; test first so you buy the right one.

Not sure what your report means? Your county health department can help, and most labs will explain your results.

Words and units on your lab report

On your reportWhat it means
MCL (Maximum Contaminant Level)The EPA's health limit for public water systems. It is also the usual limit for private wells.
SMCL (Secondary MCL)A taste, smell or staining level, not a health limit.
Action levelThe level that calls for action for lead and copper: 15 parts per billion for lead, 1.3 parts per million for copper.
ND, "not detected", or a result with "<"Not found above the lowest amount the lab can measure. "< 1" means less than 1.
RL, MRL, MDL (reporting or detection limit)The lowest amount the lab can measure for that test.
mg/LMilligrams per liter, the same as parts per million.
µg/L or ug/LMicrograms per liter, the same as parts per billion. 1 mg/L = 1,000 µg/L.
ng/LNanograms per liter, the same as parts per trillion (used for PFAS).
pCi/LPicocuries per liter, a measure of radioactivity (radon, radium, gross alpha).
P/A, Present/AbsentWhether bacteria were found at all. For bacteria, any amount counts.
CFU or MPN per 100 mLA count of bacteria. Any count above zero means bacteria were found.
Nitrate as NNitrate measured as nitrogen. The limit is 10 mg/L as N (about 45 mg/L as nitrate).
TDS (total dissolved solids)Everything dissolved in the water. High TDS can taste salty or bitter.
NTU (turbidity)How cloudy the water is. Cloudy water can carry germs.

When to test again

  • After you fix a problem, to make sure the fix worked.
  • Every year for bacteria, nitrate, pH and dissolved solids, even if this test was fine. Source
  • Right away if your water changes color, taste or smell, after a flood, or after well repairs.

Need to test again?

A mail-in kit or a certified lab can test your water. Our guide explains what to test for and how.