Data & Methodology — Green County

Full contaminant data, sample history, and sourcing for Green County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

7849 total samples analyzed across 20 analytes. Data spans 1890 to 2024.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. WI Avg
Chloride 17 1891–1960 94%
2% of limit ↓ 70% below
Sulfate 28 1935–2024 100%
6% of limit ↓ 22% below
Arsenic 3 1976–1995 67%
30% of limit ↑ 48% above
Fluoride 2 1944–1963 50%
2% of limit ↓ 63% below
PFHxS municipal 10 2023–2024 0%
0% of limit
PFOA municipal 10 2023–2024 0%
0% of limit
PFOS municipal 10 2023–2024 0%
0% of limit
PFNA municipal 10 2023–2024 0%
0% of limit
HFPO-DA (GenX) municipal 10 2023–2024 0%
0% of limit
pH 10 1944–2019 100% ~ typical
Nitrite 1 1935 0%
Sodium 28 1890–2024 100% ↓ 64% below
Hardness 7 1988–2004 100% ↑ 91% above
Fecal Coliform 3 1989–2011 0%
Lead 1 1994 0%
E. coli 2 2002–2011 0%
Manganese 1 1935 0%
Iron 1 1935 0%
Nitrate 1 1935 0%
PFBS municipal 10 2023–2024 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across WI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Chloride 17 samples
  • Sulfate 28 samples
  • Sodium 28 samples

Limited data (<15 samples) — interpret with caution

  • Arsenic 3 samples
  • Fluoride 2 samples
  • PFHxS 10 samples
  • PFOA 10 samples
  • PFOS 10 samples
  • PFNA 10 samples
  • HFPO-DA (GenX) 10 samples
  • pH 10 samples
  • Nitrite 1 sample
  • Hardness 7 samples
  • Fecal Coliform 3 samples
  • Lead 1 sample
  • E. coli 2 samples
  • Manganese 1 sample
  • Iron 1 sample
  • Nitrate 1 sample
  • PFBS 10 samples

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in WI with at least one sample for that analyte.

Last updated: 2026-05-23

Full methodology →