Home › States › Utah › Manganese

Manganese in Utah Well Water

Everyday problem 17 of 26 counties where it is common in tested wells Compared with the EPA taste-and-staining guideline of 0.05 parts per million
Highest Davis County 65% of 77 well sites high in it
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

County by county

Every Utah county where wells were tested for manganese. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For manganese in every state we cover, see our Manganese guide.

CountyHigh in itTestedHow commonConfidence
Beaver County8%60 wellsSometimes foundModerate
Box Elder County6%108 wellsSometimes foundHigh
Cache County27%41 wellsVery commonModerate
Carbon County8%26 well sitesSometimes foundModerate
Davis County65%77 well sitesVery commonModerate
Duchesne County20%94 wellsCommonModerate
Emery County43%37 well sitesVery commonModerate
Garfield County8%39 well sitesSometimes foundModerate
Grand County12%32 wellsCommonModerate
Iron County4%146 well sitesSometimes foundHigh
Juab County7%102 well sitesSometimes foundHigh
Kane County14%89 well sitesCommonModerate
Millard County7%176 well sitesSometimes foundHigh
Piute County0%15 wellsRareLow
Salt Lake County26%234 well sitesVery commonHigh
San Juan County24%115 well sitesCommonHigh
Sanpete County7%28 wellsSometimes foundModerate
Sevier County17%83 well sitesCommonModerate
Summit County22%72 well sitesCommonModerate
Tooele County12%259 well sitesCommonHigh
Uintah County36%172 well sitesVery commonHigh
Utah County22%161 well sitesCommonHigh
Wasatch County17%70 well sitesCommonModerate
Washington County12%97 well sitesCommonModerate
Wayne County44%25 wellsVery commonModerate
Weber County32%62 well sitesVery commonModerate

What it does

Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Where it comes from: It comes naturally from rock underground.

How to test for manganese

A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a manganese test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.

How to remove manganese from well water

Manganese is removed the same ways as iron, and usually together with it. For most homes, an oxidizing filter (such as manganese greensand) is the usual choice; small amounts can be removed by a water softener. Manganese needs a higher pH than iron to be removed, so check your pH first. Until it's fixed, use other water for baby formula if your well is high.

Iron and manganese level (in your test)What usually works
Iron under 1 parts per millionCatalytic carbon filter (the water needs enough dissolved oxygen)
Iron under 5 parts per million, with hard waterWater softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first
Iron and manganese together, 3 to 10 parts per millionOxidizing filter (manganese greensand), cleaned with potassium permanganate
Iron and manganese together, over 10 parts per millionChlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter

In what order

  • Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
  • Treat water where it enters the house, so every tap gets it.
  • If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.

What doesn't fix it

  • A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
  • A softener isn't a filter for iron that has already turned orange: that iron fouls it.

Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.

If your own test shows manganese over the limit, these are common fixes:

An oxidizing filter or a water softener can remove it.

Got your test results?

Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.

Make a treatment plan