Home › Utah › Duchesne County

Duchesne County, UT Wells: 20% of 94 Wells High in Manganese

Data updated November 12, 2026. Covers private wells, not public water systems.

Moderate Risk
Some wells here exceed a health limit Based on 109 wells tested Confidence: High
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Fluoride: A little fluoride protects teeth, but too much can cause white or brown spots on children's teeth, and over many years can weaken bones. It has no color, taste or smell. Source

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

Fixes: If a test finds fluoride or arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Sodium: Sodium makes water taste salty. It matters most for people on a low-salt diet; a water softener also adds sodium.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Sulfate: Sulfate makes water taste bitter and can upset the stomach (a laxative effect) in people who aren't used to it, especially babies. Source

Fixes: If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese and iron. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. If a test finds high sodium or sulfate over the taste or staining level, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Duchesne County, make sure the test covers:

  • Fluoride
  • Arsenic
  • Sodium
  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Duchesne County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Fluoride 109 wells 5% High Moderate risk

Fluoride across Utah →

Arsenic 31 wells 3% Moderate Moderate risk

Arsenic across Utah →

Water tests from agencies

1 of 31 wells tested since 1972 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1972–2021

USGS estimate

USGS estimates about a 7% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is the same as for Fluoride (above).

Nitrate 23 wells 0% Moderate Low risk

Nitrate across Utah →

Water tests from agencies

0 of 23 wells tested since 2005 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2005–2021

USGS estimate

USGS predicts typical nitrate around 0.06 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Fluoride (above).

Uranium 25 wells 0% Moderate Low risk
Lead 5 wells 0% Low Low risk

Water tests from agencies

0 of 5 wells tested since 2015 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2015–2021

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Everyday water problems
Hardness 131 wells 75% High Very common

Hard Water across Utah →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

98 of 131 wells tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2021

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

pH 33 wells 39% Moderate Very common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

13 of 33 wells tested since 2000 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2021

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Sodium 24 wells 21% Moderate Common

A salty taste at higher levels.

Water tests from agencies

5 of 24 wells tested since 2005 were above the World Health Organization's taste level of 200 parts per million; 14 of 24 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2005–2021

If a test finds high sodium, the usual fix is the same as for Fluoride (above).

Manganese 94 wells 20% Moderate Common

Manganese across Utah →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

19 of 94 wells tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2021

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Iron 99 wells 17% Moderate Common
Sulfate 24 wells 12% Moderate Common
Chloride 36 wells 0% Moderate Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 36 wells tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2021

If a test finds chloride over the taste or staining level, the usual fix is the same as for Fluoride (above).

Other substances tested
PFASacross the county USGS estimate about 11% chance Low Not rated

USGS estimate

USGS estimates about an 11% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 5,700 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 1% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 130 feet deep, and the middle half are 55 to 220 feet deep (from 1,463 state well records). Source: Utah Division of Water Rights well records.
  • About 9% of households on private wells here (about 500 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Utah DEQ cleanup sites and tank leaks.
  • About 3% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 1 – highest potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air, Utah Department of Environmental Quality tests: about 37% of homes tested here (about 260 homes, 2006 to 2022) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Utah home radon tests (Utah DEQ Indoor Radon Program).Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Since 2000, at least half of this county was in drought about 46% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Duchesne County

The only way to know what is in your well is to test it. The certified labs nearest Duchesne County are listed below. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for fluoride, arsenic and sodium.

No certified lab is within 30 miles of Duchesne County. These are the closest. Many labs also take samples by mail: ask the lab for a kit.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Closest certified lab TriCounty Health Department Environmental Laboratory

133 S 500 E, Vernal

About 49 miles away · 435-247-1160

Certified for drinking water tests

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Duchesne County

Certified lab Chemtech-Ford, Inc.

9632 S 500 W, Sandy

About 80 miles away · 801-262-7299

Certified for drinking water tests

Certified lab Utah Department of Health Division of Lab Services

4431 S 2700 W, Taylorsville

About 84 miles away · 801-965-2400

Certified for drinking water tests

Every certified lab in Utah

These labs serve well owners across Duchesne County, including Altamont, Bluebell, Duchesne, Myton, Neola, Roosevelt and Tabiona.

These labs are certified by Utah for the tests shown. Before you order, check the state's list for the tests you need. See the state's list.

Rules about testing

  • Utah has no state disclosure form and follows "buyer beware". Testing the well is up to you. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Tri-County Health Department website.

Local health departments

From the Utah Department of Environmental Quality, Local Health Departments and District Engineers.

Products on this page

Test first, then fix only what your test finds. Certified labs near Duchesne County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Fluoride, Arsenic, Nitrate, Uranium, Sodium, Sulfate, Chloride.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Fluoride, Arsenic, Nitrate, Uranium, Lead, Sodium, Sulfate, Chloride, PFAS.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Manganese, Iron.

$4,905–$5,322

View product →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Duchesne County can test your water.

Duchesne County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Duchesne County show:

  • Add this to your website: a free card about wells in Duchesne County that updates itself.
  • Download the data behind this page for Utah. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Duchesne County, UT Wells: 20% of 94 Wells High in Manganese," https://yourwaterreport.com/states/ut/duchesne-county/, data updated November 12, 2026.

Sources and dates

All 16 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Facility UST, Voluntary Cleanup Program and National Priorities List sites, Utah Department of Environmental Quality (Utah SGID).
  • Indoor Radon Program, Utah Department of Environmental Quality; Utah Environmental Public Health Tracking Network, Utah Department of Health and Human Services (IBIS-PH).
  • Points of diversion and domestic water uses, Utah Division of Water Rights.

How we get our numbers · Download the data