Data & Methodology — Cooke County

Full contaminant data, sample history, and sourcing for Cooke County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

221 well testing events on record, covering 22 analytes. Data spans 1961 to 2023.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. TX Avg
Iron 119 1940–2019 66%
33% of limit
Manganese 83 1940–2019 58%
8% of limit
Arsenic 56 1985–2019 20%
20% of limit
Chloride 1 2016 100%
11% of limit
Fluoride 204 1940–2019 94%
5% of limit
HFPO-DA (GenX) municipal 30 2023–2025 0%
Lead 56 1985–2019 11%
10% of limit
Nitrate 21 1975–2016 57%
0% of limit
Nitrite 1 2016 100%
1% of limit
PFHxS municipal 30 2023–2025 0%
PFNA municipal 30 2023–2025 0%
PFOA municipal 30 2023–2025 0%
PFOS municipal 30 2023–2025 0%
Radon 1 2016 100%
68% of limit
Sulfate 1 2016 100%
16% of limit
Uranium 6 2016–2019 17%
0% of limit
Total Coliform 1 2016 0%
Sodium 1 2016 100%
pH 1 2016 100%
PFBS municipal 30 2023–2025 0%
Hardness 1 2016 100%
E. coli 1 2016 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across TX.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 119 samples
  • Manganese 83 samples
  • Arsenic 56 samples
  • Fluoride 204 samples
  • Lead 56 samples
  • Nitrate 21 samples

Limited data (<15 samples) — interpret with caution

  • Chloride 1 sample
  • Nitrite 1 sample
  • Radon 1 sample
  • Sulfate 1 sample
  • Uranium 6 samples
  • Total Coliform 1 sample
  • Sodium 1 sample
  • pH 1 sample
  • Hardness 1 sample
  • E. coli 1 sample

No private-well PFAS data for Cooke County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Cooke County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Cooke County

25 Active public water systems
44,537 Residents on public water

Public water systems in Cooke County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in TX with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →