Data & Methodology — Coke County

Full contaminant data, sample history, and sourcing for Coke County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

180 well testing events on record, covering 18 analytes. Data spans 1959 to 2003.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. TX Avg
Sulfate 12 1987 100%
660% of limit
Chloride 42 1987–1991 100%
188% of limit
Iron 24 1961–2012 75%
112% of limit
Manganese 25 1979–2012 80%
12% of limit
Fluoride 142 1960–2012 100%
28% of limit
Arsenic 16 1993–2012 25%
34% of limit
HFPO-DA (GenX) municipal 2 2023 0%
Lead 16 1993–2012 19%
10% of limit
Nitrate 5 1993–2004 100%
6% of limit
PFHxS municipal 2 2023 50%
30% of limit
PFNA municipal 2 2023 0%
PFOA municipal 2 2023 0%
PFOS municipal 2 2023 0%
Uranium 2 2007–2012 100%
13% of limit
Sodium 12 1987 100%
pH 12 1987 100%
PFBS municipal 2 2023 0%
Hardness 12 1987 100%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across TX.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Chloride 42 samples
  • Iron 24 samples
  • Manganese 25 samples
  • Fluoride 142 samples
  • Arsenic 16 samples
  • Lead 16 samples

Limited data (<15 samples) — interpret with caution

  • Sulfate 12 samples
  • Nitrate 5 samples
  • Uranium 2 samples
  • Sodium 12 samples
  • pH 12 samples
  • Hardness 12 samples

No private-well PFAS data for Coke County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Coke County. PFAS has been detected in local public water systems (UCMR 5 data) — indicated by the "municipal" badge in the table above — but this does not directly indicate private well contamination. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Coke County

6 Active public water systems
2,755 Residents on public water

Public water systems in Coke County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in TX with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →