Data & Methodology — Wood County

Full contaminant data, sample history, and sourcing for Wood County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

177 well testing events on record, covering 20 analytes. Data spans 1965 to 2020.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. OH Avg
Sulfate 103 1984–2014 100%
156% of limit ↑ 169% above
Iron 145 1972–2014 94%
50% of limit ↓ 91% below
Manganese 140 1972–2014 81%
19% of limit ↓ 96% below
Chloride 139 1972–2014 100%
10% of limit ↓ 76% below
Lead 95 1972–2014 37%
0% of limit ↓ 100% below
Nitrate 92 1972–1992 40%
0% of limit ↓ 84% below
Arsenic 121 1984–2014 44%
0% of limit ↓ 100% below
Fluoride 126 1972–2014 100%
25% of limit ↑ 50% above
HFPO-DA (GenX) municipal 23 2023–2025 0%
Nitrite 88 1984–1995 43%
0% of limit ↓ 91% below
PFHxS municipal 23 2023–2025 0%
PFNA municipal 23 2023–2025 0%
PFOA municipal 23 2023–2025 0%
PFOS municipal 23 2023–2025 0%
Radon 1 1992 100%
11% of limit ↓ 87% below
Uranium 31 1986–1987 94%
1% of limit ↓ 66% below
pH 140 1972–2005 100%
~ typical
Sodium 141 1972–2014 100%
↓ 25% below
Hardness 134 1972–2014 100%
↑ 33% above
PFBS municipal 23 2023–2025 4%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across OH.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Sulfate 103 samples
  • Iron 145 samples
  • Manganese 140 samples
  • Chloride 139 samples
  • Lead 95 samples
  • Nitrate 92 samples
  • Arsenic 121 samples
  • Fluoride 126 samples
  • Nitrite 88 samples
  • Uranium 31 samples
  • pH 140 samples
  • Sodium 141 samples
  • Hardness 134 samples

Limited data (<15 samples) — interpret with caution

  • Radon 1 sample

No private-well PFAS data for Wood County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Wood County. PFAS has been detected in local public water systems (UCMR 5 data) — indicated by the "municipal" badge in the table above — but this does not directly indicate private well contamination. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Wood County

55 Active public water systems
116,066 Residents on public water
12% Households on private wells

Public water systems in Wood County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

CDC Health Outcome Correlations

Where contaminants detected in Wood County have established associations with specific health outcomes, we cross-reference CDC PLACES county-level prevalence data. This is a contextual signal, not a causal claim.

Contaminant Associated Condition Wood County Prevalence OH Average Source Year
Lead Heart disease rate 6.1% 7.6% 2020
Arsenic Cancer prevalence 6.1% 6.8% 2020
Arsenic Kidney disease rate 2.6% 3.1% 2020

Source: CDC PLACES county-level estimates. Raw data: Download Wood County CDC PLACES data →

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in OH with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →