Data & Methodology — Gallia County

Full contaminant data, sample history, and sourcing for Gallia County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

40 well testing events on record, covering 18 analytes. Data spans 1964 to 2017.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. OH Avg
PFOA municipal 3 2024–2025 100%
188% of limit ↑ 39% above
Manganese 28 1973–2001 100%
140% of limit ↓ 21% below
Iron 35 1973–2001 100%
54% of limit ↓ 88% below
Lead 21 1975–2001 100%
0% of limit ↓ 100% below
Arsenic 17 1986–2001 100%
0% of limit ↓ 100% below
Chloride 37 1973–2001 100%
6% of limit ↓ 58% below
Fluoride 12 1973–2001 100%
5% of limit ↓ 55% below
HFPO-DA (GenX) municipal 3 2024–2025 0%
— —
Nitrate 22 1973–1989 100%
21% of limit ↑ 338% above
Nitrite 2 1974–1992 100%
1% of limit ↑ 91% above
PFHxS municipal 3 2024–2025 0%
— —
PFNA municipal 3 2024–2025 0%
— —
PFOS municipal 3 2024–2025 0%
— —
Sulfate 1 1978 100%
17% of limit ↓ 62% below
Sodium 36 1973–2001 100%
— ↓ 39% below
pH 11 1973–2001 100%
— ~ typical
PFBS municipal 3 2024–2025 0%
— —
Hardness 8 1978–2001 100%
— ↓ 43% below

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across OH.

Compare your result with Gallia County

Of the 37 chloride tests on record for Gallia County (1973–2001), 0% found none, and half were below 16 mg/L.

Of the 35 iron tests on record for Gallia County (1973–2001), 0% found none, and half were below 162 µg/L.

Of the 21 lead tests on record for Gallia County (1975–2001), 0% found none.

Of the 28 manganese tests on record for Gallia County (1973–2001), 0% found none, and half were below 70 µg/L.

Of the 22 nitrate tests on record for Gallia County (1973–1989), 0% found none, and half were below 2.12 mg/L.

Have a number from your lab? Enter it to see where it falls. Nothing is sent anywhere.

Want the full picture for your well? Check all your results.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Manganese 28 samples
  • Iron 35 samples
  • Lead 21 samples
  • Arsenic 17 samples
  • Chloride 37 samples
  • Nitrate 22 samples
  • Sodium 36 samples

Limited data (<15 samples) — interpret with caution

  • Fluoride 12 samples
  • Nitrite 2 samples
  • Sulfate 1 sample
  • pH 11 samples
  • Hardness 8 samples

No private-well PFAS data for Gallia County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Gallia County. PFAS has been detected in local public water systems (UCMR 5 data) — indicated by the "municipal" badge in the table above — but this does not directly indicate private well contamination. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Gallia County

3 Active public water systems
28,959 Residents on public water
1% Households on private wells

Public water systems in Gallia County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

CDC Health Outcome Correlations

Where contaminants detected in Gallia County have established associations with specific health outcomes, we cross-reference CDC PLACES county-level prevalence data. This is a contextual signal, not a causal claim.

Contaminant Associated Condition Gallia County Prevalence OH Average Source Year
PFOA Cancer prevalence 6.2% 6.8% 2020
Arsenic Kidney disease rate 2.9% 3.1% 2020
Lead Heart disease rate 7.1% 7.6% 2020

Source: CDC PLACES county-level estimates. Raw data: Download Gallia County CDC PLACES data →

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in OH with at least one sample for that analyte.

Last updated: 2026-08-04

Full methodology →