Home › New Hampshire › Hillsborough County

Hillsborough County, NH Wells Near PFAS Sites: 32% High in PFAS

Data updated November 13, 2026. Covers private wells, not public water systems.

High Risk
Wells here often exceed a health limit Based on 9,230 wells tested Confidence: High
Top concerns in this county PFAS mainly near PFAS SitesAlso test every year for bacteria and nitrate.
Testing strongly recommended Test your well now →Mail-in kit sold on Amazon, results in about a weekAdd a PFAS testFind a certified lab

What this means for you

Your health

PFAS: PFAS are man-made chemicals that do not break down. Drinking them for years is linked to some cancers, a weaker immune system, high cholesterol and lower birth weight. You can't see, smell or taste them, so a lab test is the only way to know. Source

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

Lead: Lead can harm how children's brains grow and learn, even at low levels. In adults it can raise blood pressure and harm the kidneys. It has no color, taste or smell. Source

Copper: A lot of copper can upset the stomach soon after drinking it. Drinking it for many years can harm the liver or kidneys. People with Wilson's disease should ask their doctor. It can leave blue-green stains on sinks and tubs and give water a metallic taste. Running the tap before drinking helps. A neutralizing filter for acidic water, or a filter certified for copper, can fix it. Source

Uranium: Drinking water with uranium for many years can harm the kidneys and raises the risk of cancer. It has no color, taste or smell. Source

Fixes: If a test finds PFAS or lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System. Running the tap before drinking helps. If a test finds arsenic or uranium over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Fixes: If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. A water softener, like the Matrixx Smart Metered Water Softener, also handles small amounts of iron. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Hillsborough County, make sure the test covers:

  • PFAS
  • Arsenic
  • Lead
  • Copper
  • Uranium
  • Iron
  • Bacteria and nitrate, every year

What tests found in Hillsborough County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
PFASNear PFAS Sites 9,230 wells 32% High High risk

PFAS ("Forever Chemicals") across New Hampshire →

State testing program

32% of 9,230 wells tested near known or suspected pollution sites were above a New Hampshire limit for any PFAS tested; 60.7% were above an EPA limit for any PFAS tested.

Source: NHDES PFAS sampling of private wells, 2026

USGS estimate

USGS estimates about a 35% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

About 1% of households on private wells here (about 420 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364).

Arsenic 3,558 wells 24% High High risk

Arsenic across New Hampshire →

State testing program

24.5% of 3,558 wells tested by owners who sent samples to a state lab (2006–2022) were above New Hampshire's limit of 5 parts per billion (stricter than the EPA's 10).

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

42 of 157 well sites tested since 1986 were above New Hampshire's limit of 5 parts per billion (stricter than the EPA's 10); 29 of 157 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2019

USGS estimate

USGS estimates about an 18% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Lead 1,580 wells 15% High High risk

Lead across New Hampshire →

State testing program

14.7% of 1,580 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA action level of 15 parts per billion in the first water from the tap after it sat in the pipes (lead and copper usually come from a home's pipes and fixtures, not the well; running the tap before drinking helps).

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

0 of 52 wells tested since 2000 were above the EPA action level of 15 parts per billion in the first water from the tap after it sat in the pipes (lead and copper usually come from a home's pipes and fixtures, not the well; running the tap before drinking helps); 0 of 52 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds lead over the limit, the usual fix is the same as for PFAS ("forever chemicals", any regulated compound) (above).

Copper 1,576 wells 14% High High risk

State testing program

13.6% of 1,576 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA action level of 1.3 parts per million in the first water from the tap after it sat in the pipes (lead and copper usually come from a home's pipes and fixtures, not the well; running the tap before drinking helps).

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Uranium 3,323 wells 5% High Moderate risk

State testing program

4.7% of 3,323 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA limit of 30 parts per billion.

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

3 of 123 wells tested since 1999 were above the EPA limit of 30 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1999–2019

If a test finds uranium over the limit, the usual fix is the same as for Arsenic (above).

Nitrate 2,119 wells 0.7% High Low risk

Nitrate across New Hampshire →

State testing program

0.7% of 2,119 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

0 of 9 well sites tested since 2000 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

USGS estimate

USGS predicts typical nitrate around 0.09 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

PFOA 2 wells 1 of 2 Low Too few tests

PFAS ("Forever Chemicals") across New Hampshire →

Coliform Bacteria 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2019 was positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 1 well 0 of 1 Low Too few tests
PFOS 2 wells 0 of 2 Low Too few tests

PFAS ("Forever Chemicals") across New Hampshire →

PFHxS 2 wells 0 of 2 Low Too few tests

PFAS ("Forever Chemicals") across New Hampshire →

Everyday water problems
pH 8 wells 25% Low Very common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

2 of 8 wells tested since 2000 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Iron 3,290 wells 15% High Common

Iron across New Hampshire →

Brown or orange staining, a metallic taste and clogged fixtures.

State testing program

14.7% of 3,290 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

48 of 224 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Hardness 110 well sites 9% High Sometimes found

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

10 of 110 well sites tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Chloride 3,631 wells 3% High Sometimes found

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

State testing program

3.2% of 3,631 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA taste guideline of 250 parts per million.

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

0 of 9 well sites tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

Sodium 9 well sites 0% Low Rare

A salty taste at higher levels.

Water tests from agencies

0 of 9 well sites tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 5 of 9 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Sulfate 9 well sites 0% Low Rare
Manganese 3,290 wells found in 6% High Not rated

Black or brown staining and a bitter, metallic taste.

State testing program

6.5% of 3,290 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA health advisory level of 0.3 parts per million.

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

68 of 171 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

USGS estimate

USGS estimates about a 19% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Other substances tested
Radon 695 wells 47% High High risk

State testing program

46.6% of 695 wells tested by owners who sent samples to a state lab (2006–2022) were above New Hampshire's radon-in-water level of 2,000 picocuries per liter (a measure of radioactivity).

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

1 of 5 wells tested since 2000 were above New Hampshire's radon-in-water level of 2,000 picocuries per liter (a measure of radioactivity); 0 of 5 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2003

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

Fluoride 4,530 wells 0.5% High Low risk

State testing program

0.5% of 4,530 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA limit of 4 parts per million.

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

1 of 113 well sites tested since 1970 were above the EPA limit of 4 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

If a test finds fluoride over the limit, the usual fix is the same as for Arsenic (above).

Nitrite 2,118 wells 0% High Low risk

Nitrate across New Hampshire →

State testing program

0% of 2,118 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA limit of 1 part per million (as nitrogen).

Source: Well water test results, NH Environmental Public Health Tracking, 2006–2022

Water tests from agencies

0 of 7 wells tested since 2000 were above the EPA limit of 1 part per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds nitrite over the limit, the usual fix is the same as for Arsenic (above).

PFHpA 2 wells found in 50% Low Not rated
PFBS 2 wells 0 of 2 Low Too few tests
PFHxA 2 wells found in 0% Low Not rated
PFBA 2 wells found in 0% Low Not rated
PFPeA 2 wells found in 0% Low Not rated
PFDA 2 wells found in 0% Low Not rated

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Your town

Find your town

Type your town or ZIP code to see its results and find it on the map.

These results come from wells tested near known or suspected pollution sites, town by town. Pick a test to color the map, or tap a town to find it in the table.

How to read the table: each number is the share of wells tested in that town that were over the limit. The small number under it is how many wells were tested. A dash means fewer than ten wells were tested, so the state does not report it. Tap a column name to sort. Source: NHDES PFAS sampling of private wells.

Town ArsenicChlorideCopperFluorideIronLeadManganeseNitratePFASRadonUranium
AMHERST 1.9%of 702 wells 3.1%of 711 wells 19.7%of 61 wells 0.0%of 843 wells 8.1%of 702 wells 16.4%of 61 wells 2.9%of 701 wells 1.3%of 75 wells 57.5%of 1,221 wells 54.3%of 35 wells 5.1%of 703 wells
ANTRIM 37.0%of 73 wells 0.0%of 84 wells 9.4%of 64 wells 0.0%of 78 wells 17.1%of 70 wells 21.9%of 64 wells 1.4%of 70 wells 0.0%of 84 wells – 30.4%of 23 wells 0.0%of 71 wells
BEDFORD 10.1%of 615 wells 5.6%of 613 wells 6.1%of 164 wells 0.2%of 870 wells 21.9%of 608 wells 16.5%of 164 wells 16.3%of 609 wells 0.5%of 183 wells 60.0%of 4,415 wells 27.1%of 70 wells 2.1%of 610 wells
BENNINGTON 54.2%of 24 wells 0.0%of 28 wells 4.8%of 21 wells 8.0%of 25 wells 34.8%of 23 wells 0.0%of 21 wells 13.0%of 23 wells 0.0%of 28 wells –– 0.0%of 23 wells
BROOKLINE 2.6%of 38 wells 0.0%of 50 wells 7.4%of 27 wells 0.6%of 163 wells 5.9%of 34 wells 7.4%of 27 wells 0.0%of 34 wells 0.0%of 45 wells 35.7%of 42 wells – 8.3%of 36 wells
DEERING 29.1%of 103 wells 2.8%of 109 wells 18.5%of 81 wells 1.9%of 106 wells 18.9%of 95 wells 20.7%of 82 wells 5.3%of 95 wells 0.0%of 110 wells – 7.4%of 27 wells 0.0%of 94 wells
FRANCESTOWN 47.8%of 46 wells 0.0%of 45 wells 12.8%of 39 wells 0.0%of 51 wells 19.0%of 42 wells 7.7%of 39 wells 0.0%of 42 wells 2.2%of 45 wells –– 0.0%of 42 wells
GOFFSTOWN 62.2%of 135 wells 1.6%of 128 wells 18.4%of 103 wells 0.5%of 202 wells 17.8%of 118 wells 16.3%of 104 wells 10.1%of 119 wells 0.8%of 119 wells 45.0%of 60 wells 83.1%of 65 wells 6.9%of 116 wells
GREENFIELD 41.1%of 56 wells 0.0%of 55 wells 16.0%of 50 wells 3.4%of 59 wells 14.0%of 50 wells 8.0%of 50 wells 0.0%of 50 wells 0.0%of 55 wells – 26.3%of 38 wells 0.0%of 52 wells
GREENVILLE –––––––––––
HANCOCK 56.2%of 96 wells 3.2%of 93 wells 12.6%of 87 wells 0.0%of 94 wells 17.2%of 87 wells 18.4%of 87 wells 1.1%of 87 wells 0.0%of 93 wells – 40.0%of 25 wells 0.0%of 89 wells
HILLSBOROUGH 32.3%of 192 wells 1.8%of 222 wells 12.9%of 140 wells 1.9%of 206 wells 15.8%of 184 wells 12.1%of 140 wells 3.3%of 184 wells 3.1%of 222 wells 2.2%of 93 wells 9.8%of 41 wells 0.0%of 184 wells
HOLLIS 38.0%of 213 wells 2.5%of 199 wells 9.8%of 92 wells 0.7%of 300 wells 5.3%of 189 wells 21.7%of 92 wells 3.7%of 189 wells 0.0%of 115 wells 47.4%of 342 wells 35.2%of 54 wells 1.6%of 191 wells
HUDSON 52.6%of 156 wells 3.3%of 151 wells 12.8%of 94 wells 0.0%of 157 wells 5.7%of 140 wells 9.6%of 94 wells 2.1%of 140 wells 0.9%of 112 wells 73.7%of 537 wells 80.9%of 47 wells 20.7%of 140 wells
LITCHFIELD – 0.0%of 27 wells – 3.6%of 28 wells ––– 0.0%of 27 wells 76.5%of 881 wells ––
LYNDEBOROUGH ––– 0.0%of 29 wells –––– 28.6%of 14 wells ––
MANCHESTER – 9.1%of 22 wells – 0.0%of 27 wells –––– 82.5%of 63 wells ––
MASON –––––––– 11.1%of 9 wells ––
MERRIMACK 2.5%of 242 wells 1.6%of 243 wells 8.3%of 24 wells 0.7%of 269 wells 8.3%of 241 wells 20.8%of 24 wells 3.3%of 241 wells 0.0%of 31 wells 67.0%of 1,111 wells – 2.1%of 241 wells
MILFORD 3.1%of 32 wells 0.0%of 34 wells – 0.0%of 99 wells 3.2%of 31 wells – 0.0%of 31 wells 0.0%of 21 wells 33.3%of 36 wells – 21.2%of 33 wells
MONT VERNON 7.7%of 39 wells 17.0%of 47 wells 21.7%of 23 wells 0.0%of 77 wells 36.6%of 41 wells 8.3%of 24 wells 14.6%of 41 wells 0.0%of 33 wells 17.4%of 46 wells – 17.5%of 40 wells
NASHUA 38.1%of 21 wells ––––––– 82.4%of 51 wells ––
NEW BOSTON 41.3%of 92 wells 1.0%of 95 wells 16.9%of 59 wells 0.0%of 162 wells 22.1%of 86 wells 10.2%of 59 wells 8.1%of 86 wells 0.0%of 71 wells 16.5%of 79 wells 60.0%of 35 wells 5.7%of 88 wells
NEW IPSWICH 34.3%of 70 wells 4.3%of 70 wells 20.4%of 49 wells 0.0%of 72 wells 25.0%of 60 wells 20.4%of 49 wells 6.9%of 58 wells 0.0%of 70 wells 13.6%of 22 wells 66.7%of 33 wells 0.0%of 58 wells
PELHAM 48.2%of 139 wells 3.5%of 144 wells 13.1%of 107 wells 0.0%of 143 wells 9.6%of 125 wells 12.0%of 108 wells 7.2%of 125 wells 0.0%of 132 wells 58.8%of 160 wells 78.4%of 74 wells 30.7%of 127 wells
PETERBOROUGH 40.7%of 108 wells 0.0%of 47 wells 12.2%of 41 wells 0.0%of 46 wells 22.7%of 44 wells 7.3%of 41 wells 2.3%of 44 wells 0.0%of 47 wells –– 0.0%of 44 wells
TEMPLE 39.4%of 71 wells 0.0%of 69 wells 27.9%of 61 wells 0.0%of 71 wells 20.0%of 70 wells 16.4%of 61 wells 7.2%of 69 wells 1.4%of 69 wells – 60.5%of 43 wells 1.5%of 66 wells
WEARE 38.9%of 239 wells 4.5%of 287 wells 12.2%of 189 wells 1.0%of 303 wells 19.9%of 216 wells 14.3%of 189 wells 7.3%of 218 wells 0.7%of 274 wells 6.5%of 31 wells 17.6%of 85 wells 0.0%of 217 wells
WILTON 8.6%of 35 wells 2.8%of 36 wells – 2.0%of 50 wells 20.6%of 34 wells – 2.9%of 34 wells 0.0%of 36 wells 10.0%of 10 wells – 5.4%of 37 wells
WINDSOR 9.5%of 21 wells 4.6%of 22 wells ––––– 0.0%of 22 wells 0.0%of 7 wells – 0.0%of 21 wells

About wells here

  • About 33,000 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 29% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 420 feet deep, and the middle half are 300 to 590 feet deep (from 10,028 state well records). Source: NH Geological Survey water well records.
  • About 25% of households on private wells here (about 8,300 homes) live within 1 mile of groundwater pollution on the state's list or a Superfund site (the EPA's list of the most serious toxic waste sites). That does not mean their wells are affected, but it is a good reason to test. Source: NHDES remediation sites.
  • USGS maps no limestone and similar rock with cracks and caves (karst) in this county. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 34% of homes tested here (about 3,600 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Since 2000, at least half of this county was in drought about 14% of the time, most recently with severe drought in 2022. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Hillsborough County

The only way to know what is in your well is to test it. The certified labs nearest Hillsborough County are listed below. The closest is Nelson Analytical LLC in Manchester, about 16 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for PFAS, arsenic and lead.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Order a test kit Tap Score PFAS Water Test

A mail-in lab test for 18 PFAS (forever chemicals), including PFOA and PFOS.

Sold on Amazon · mailed to your home

Order a PFAS Test →
Nearest certified lab Nelson Analytical LLC

490 E. Industrial Park Dr., Manchester

About 16 miles away · 603-622-0200

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Hillsborough County

Certified lab Granite State Analytical

22 Manchester Road, Derry

About 19 miles away · 603-432-3044

Certified lab Eurofins Environmental Testing Eastern Analytical

51 Antrim Avenue, Concord

About 23 miles away · 603-228-0525

Certified lab NHDHHS Public Health Laboratories

29 Hazen Drive, Concord

About 23 miles away · 603-271-3445

Certified lab New England Radon Ltd.

11A Industrial Way, Unit 3, Salem

About 25 miles away · 603-893-4260

Every certified lab in New Hampshire

These labs serve well owners across Hillsborough County, including Amherst, Antrim, Bedford, Bennington, Brookline, Deering, East Merrimack, Francestown, Goffstown, Greenfield, Greenville, Hancock, Hillsborough, Hollis, Hudson, Klondike Corner, Litchfield, Lyndeborough, Manchester, Mason, Merrimack, Milford, Mont Vernon, Nashua, New Boston, New Ipswich, Pelham, Peterborough, Pinardville, Sharon, Temple, Weare, Wilton and Windsor.

These labs are accredited by New Hampshire and test water from private wells. Ask the lab which tests it offers. See the state's list.

Rules about testing

Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Manchester Health Department, Monitoring Wells website.

Local health departments

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Hillsborough County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Test kit Tap Score PFAS Water Test

A mail-in lab test for 18 PFAS (forever chemicals), including PFOA and PFOS.

Sold on Amazon · mailed to your home

Order a PFAS Test →

Fixes, if a test finds a problem

Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For PFAS, Lead, PFOA, PFOS, PFHxS, PFHpA, PFBS, PFHxA, PFBA, PFPeA, PFDA.

$1,669–$2,364

View product →
Usual fix American Made Reverse Osmosis System

For Arsenic, Uranium, Nitrate, Chloride, Sodium, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for PFAS, Arsenic, Lead, Uranium, Nitrate, PFOA, PFOS, PFHxS, Chloride, Sodium, Sulfate, Fluoride, Nitrite, PFHpA, PFBS, PFHxA, PFBA, PFPeA, PFDA.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Iron, Hardness, Manganese.

$4,905–$5,322

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Hillsborough County can test your water.

Hillsborough County: High RiskTest your well now

For health departments, realtors and groups

Free ways to share what wells in Hillsborough County show:

  • Add this to your website: a free card about wells in Hillsborough County that updates itself.
  • Download the data behind this page for New Hampshire. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Hillsborough County, NH Wells Near PFAS Sites: 32% High in PFAS," https://yourwaterreport.com/states/nh/hillsborough-county/, data updated November 13, 2026.

Sources and dates

All 19 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • PFAS Sampling Map, New Hampshire Department of Environmental Services.
  • Remediation Sites (DES_Data_Public), New Hampshire Department of Environmental Services.
  • New Hampshire Department of Health and Human Services, Environmental Public Health Tracking Program. Private well water quality: town summary.
  • Water Well Inventory, New Hampshire Geological Survey, New Hampshire Department of Environmental Services.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.

How we get our numbers · Download the data