Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source
PFAS: PFAS are man-made chemicals that do not break down. Drinking them for years is linked to some cancers, a weaker immune system, high cholesterol and lower birth weight. You can't see, smell or taste them, so a lab test is the only way to know. Source
Lead: Lead can harm how children's brains grow and learn, even at low levels. In adults it can raise blood pressure and harm the kidneys. It has no color, taste or smell. Source
Copper: A lot of copper can upset the stomach soon after drinking it. Drinking it for many years can harm the liver or kidneys. People with Wilson's disease should ask their doctor. It can leave blue-green stains on sinks and tubs and give water a metallic taste. Running the tap before drinking helps. A neutralizing filter for acidic water, or a filter certified for copper, can fix it. Source
Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.
Everyday problems
Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.
22.1% of 1,532 wells tested by owners who sent samples to a state lab (2006–2022) were above New Hampshire's limit of 5 parts per billion (stricter than the EPA's 10).
0 of 31 wells tested since 1986 were above New Hampshire's limit of 5 parts per billion (stricter than the EPA's 10); 0 of 32 were above the EPA limit of 10 parts per billion.
13.9% of 115 wells tested near known or suspected pollution sites were above a New Hampshire limit for any PFAS tested; 25.2% were above an EPA limit for any PFAS tested.
USGS estimates about a 31% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.
No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.
12.2% of 1,398 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA action level of 15 parts per billion in the first water from the tap after it sat in the pipes (lead and copper usually come from a home's pipes and fixtures, not the well; running the tap before drinking helps).
0 of 2 wells tested since 2000 were above the EPA action level of 15 parts per billion in the first water from the tap after it sat in the pipes (lead and copper usually come from a home's pipes and fixtures, not the well; running the tap before drinking helps); 0 of 2 were above the EPA action level of 15 parts per billion.
9.6% of 1,379 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA action level of 1.3 parts per million in the first water from the tap after it sat in the pipes (lead and copper usually come from a home's pipes and fixtures, not the well; running the tap before drinking helps).
USGS predicts typical nitrate around 0.05 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).
Brown or orange staining, a metallic taste and clogged fixtures.
State testing program
23.8% of 1,481 wells tested by owners who sent samples to a state lab (2006–2022) were above the EPA taste-and-staining guideline of 0.3 parts per million.
USGS estimates about a 15% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.
0 of 2 wells tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 1 of 2 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.
If a test finds sulfate over the taste or staining level, the usual fix is the same as for Arsenic (above).
Other substances tested
Radon577 wells37%HighHigh risk
State testing program
36.7% of 577 wells tested by owners who sent samples to a state lab (2006–2022) were above New Hampshire's radon-in-water level of 2,000 picocuries per liter (a measure of radioactivity).
0 of 2 wells tested since 2000 were above New Hampshire's radon-in-water level of 2,000 picocuries per liter (a measure of radioactivity); 0 of 2 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).
If a test finds nitrite over the limit, the usual fix is the same as for Arsenic (above).
How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.
Your town
Find your town
Type your town or ZIP code to see its results and find it on the map.
These results come from wells tested near known or suspected pollution sites, town by town. Pick a test to color the map, or tap a town to find it in the table.
How to read the table: each number is the share of wells tested in that town that were over the limit. The small number under it is how many wells were tested. A dash means fewer than ten wells were tested, so the state does not report it. Tap a column name to sort. Source: NHDES PFAS sampling of private wells.
Half of the private wells on record here are more than 350 feet deep, and the middle half are 240 to 500 feet deep (from 4,815 state well records). Source: NH Geological Survey water well records.
About 21% of households on private wells here (about 3,300 homes) live within 1 mile of groundwater pollution on the state's list or a Superfund site (the EPA's list of the most serious toxic waste sites). That does not mean their wells are affected, but it is a good reason to test. Source: NHDES remediation sites.
Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
Radon in indoor air: about 32% of homes tested here (about 280 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
Since 2000, FEMA has declared 6 flood or hurricane disasters that included this county, most recently in 2023. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
Since 2000, at least half of this county was in drought about 14% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.
These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.
Well water testing in Belknap County
The only way to know what is in your well is to test it. The certified labs nearest Belknap County are listed below. The closest is NHDHHS Public Health Laboratories in Concord, about 21 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for arsenic, PFAS and lead.
Order a test kitTap Score Advanced Well Water Test
A mail-in test from certified labs for more than 100 substances, with results in about a week.
These labs serve well owners across Belknap County, including Alton, Barnstead, Belmont, Center Harbor, Gilford, Gilmanton, Laconia, Meredith, New Hampton, Sanbornton, Tilton and Tilton Northfield.
These labs are accredited by New Hampshire and test water from private wells. Ask the lab which tests it offers. See the state's list.
Rules about testing
Federal rules and home loans (6)
No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source
Local health codes in this state have not been reviewed yet.
Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.
Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.
Ready to test your well?
A mail-in kit or a certified lab near Belknap County can test your water.
Download the data behind this page for New Hampshire. It is free to reuse if you credit YourWaterReport.
To cite this page: YourWaterReport, "Belknap County, NH Wells: 22% of 1,532 Wells High in Arsenic," https://yourwaterreport.com/states/nh/belknap-county/, data updated November 12, 2026.
Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
PFAS Sampling Map, New Hampshire Department of Environmental Services.
Remediation Sites (DES_Data_Public), New Hampshire Department of Environmental Services.
New Hampshire Department of Health and Human Services, Environmental Public Health Tracking Program. Private well water quality: town summary.
Water Well Inventory, New Hampshire Geological Survey, New Hampshire Department of Environmental Services.
The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.