Home › Missouri › Linn County

Linn County, MO Well Water: What to Test For

Data updated November 6, 2026. Covers private wells, not public water systems.

Moderate Risk
Some wells here exceed a health limit Based on 20 samples tested Confidence: Moderate
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Lead: Lead can harm how children's brains grow and learn, even at low levels. In adults it can raise blood pressure and harm the kidneys. It has no color, taste or smell. Source

Fixes: If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System. Running the tap before drinking helps. All products on this page.

Nitrate and arsenic look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Tests here don't show common problems with stains, scale or taste.

Find out what's in your well

The only way to know is to test. For a well in Linn County, make sure the test covers:

  • Lead
  • Bacteria and nitrate, every year

What tests found in Linn County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Lead 20 samples 5% Moderate Moderate risk

Lead across Missouri →

State testing program

5% of 20 samples that owners chose to send to a lab (2010–2023) were above the EPA action level of 15 parts per billion.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Nitrateacross the county USGS estimate about 0.8 of 10 parts per million Low Low risk

Nitrate across Missouri →

USGS estimate

USGS predicts typical nitrate around 0.8 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

State testing program

0% of 5 samples that owners chose to send to a lab (2010–2023) were above the EPA limit of 10 parts per million (as nitrogen).

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenicacross the county USGS estimate about 2% chance Low Low risk

Arsenic across Missouri →

USGS estimate

USGS estimates about a 2% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

State testing program

0% of 2 samples that owners chose to send to a lab (2010–2023) were above the EPA limit of 10 parts per billion.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds arsenic over the limit, the usual fix is the same as for Nitrate (above).

Uranium 2 samples 0% Low Too few tests
Everyday water problems
Hardness 3 wells 3 of 3 Low Too few tests

Hard Water across Missouri →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

3 of 3 wells tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–1980

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Iron 3 wells 1 of 3 Low Too few tests

Iron across Missouri →

Brown or orange staining, a metallic taste and clogged fixtures.

Water tests from agencies

1 of 3 wells tested since 1970 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–1980

State testing program

100% of 2 samples that owners chose to send to a lab (2010–2023) were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Manganeseacross the county USGS estimate about 16% chance Low Not rated

Black or brown staining and a bitter, metallic taste.

USGS estimate

USGS estimates about a 16% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

Water tests from agencies

1 of 3 wells tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–1980

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Chloride 4 samples 0% Low Too few tests

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

State testing program

0% of 4 samples that owners chose to send to a lab (2010–2023) were above the EPA taste guideline of 250 parts per million.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds chloride over the taste or staining level, the usual fix is the same as for Nitrate (above).

Sulfate 4 samples 0% Low Too few tests
Other substances tested
PFASacross the county USGS estimate about 15% chance Low Not rated

USGS estimate

USGS estimates about a 15% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Fluoride 3 wells 0 of 3 Low Too few tests

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 2,600 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 0% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 95 feet deep, and the middle half are 40 to 130 feet deep (from 30 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 2005 (from 29 state well records). Source: U.S. Groundwater Well Database.
  • About 2% of households on private wells here (about 39 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Missouri DNR cleanup sites.
  • About 4% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Another 9% has this kind of rock buried deeper underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Farms here add more nitrogen (fertilizer and manure) per square mile than 71% of US counties (USGS 2017). Source: USGS county farm nitrogen estimates, 2017.Why it matters: Fertilizer and manure are the main sources of nitrate in well water.
  • Since 2000, at least half of this county was in drought about 20% of the time, most recently with severe drought in 2023. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Linn County

The only way to know what is in your well is to test it. The certified labs nearest Linn County are listed below. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for lead.

No certified lab is within 30 miles of Linn County. These are the closest. Many labs also take samples by mail: ask the lab for a kit.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Closest certified lab Microbac Laboratories Inc.-Centerville

205 E. Van Buren St., Centerville

About 61 miles away · 641-792-8451

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Linn County

Certified lab Engineering Surveys & Services

1113 Fay St., Columbia

About 76 miles away · 573-449-2646

Certified lab Blue Valley Laboratories Inc.

814 E. 16th St., Kansas City

About 95 miles away · 816-471-4719

Every certified lab in Missouri

These labs serve well owners across Linn County, including Brookfield, Browning, Bucklin, Laclede, Linneus, Marceline, Meadville, Purdin and St. Catharine.

These labs are certified by Missouri to test drinking water for bacteria. For other tests, ask the lab what it is certified for. See the state's list.

Rules about testing

  • Missouri has no state disclosure form for sellers and follows "buyer beware". A seller can't lie about the home, but testing the well is up to you. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Linn County Health Department website.

Local health departments

From the Missouri Department of Health and Senior Services, Local Public Health Agency Directory.

Products on this page

Test first, then fix only what your test finds. Certified labs near Linn County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix American Made Reverse Osmosis System

For Nitrate, Arsenic, Uranium, Chloride, Sulfate, Fluoride.

$599–$799

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Lead, Nitrate, Arsenic, Uranium, Chloride, Sulfate, PFAS, Fluoride.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Iron, Manganese.

$4,905–$5,322

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Linn County can test your water.

Linn County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Linn County show:

  • Add this to your website: a free card about wells in Linn County that updates itself.
  • Download the data behind this page for Missouri. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Linn County, MO Well Water: What to Test For," https://yourwaterreport.com/states/mo/linn-county/, data updated November 6, 2026.

Sources and dates

All 17 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Missouri Private Drinking Water (story map), Missouri Department of Health and Senior Services.
  • Hazardous Waste Program Cleanup Sites (E-Start), Missouri Department of Natural Resources.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data