Home › Missouri › Crawford County

Crawford County, MO Wells: 17% of 23 Samples High in Iron

Data updated November 12, 2026. Covers private wells, not public water systems.

Moderate Risk
Some wells here exceed a health limit Based on 38 samples tested Confidence: Moderate
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Nitrate: Nitrate is most dangerous for babies under 6 months. It can keep their blood from carrying enough oxygen. Use other water for baby formula if your well is high. It has no color, taste or smell. Boiling does not remove it; it makes it stronger. Source

Fixes: If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Arsenic looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Fixes: If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of iron. If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Crawford County, make sure the test covers:

  • Nitrate
  • Iron
  • Bacteria and nitrate, every year

What tests found in Crawford County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Nitrate 38 samples 3% Moderate Moderate risk

Nitrate across Missouri →

State testing program

2.6% of 38 samples that owners chose to send to a lab (2010–2023) were above the EPA limit of 10 parts per million (as nitrogen).

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

USGS estimate

USGS predicts typical nitrate around 0.08 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

Water tests from agencies

0 of 1 well tested since 2016 was above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Lead 58 samples 2% Moderate Low risk

Lead across Missouri →

State testing program

1.7% of 58 samples that owners chose to send to a lab (2010–2023) were above the EPA action level of 15 parts per billion.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

Water tests from agencies

0 of 1 well tested since 2016 was above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Arsenicacross the county USGS estimate about 1% chance Low Low risk

Arsenic across Missouri →

USGS estimate

USGS estimates about a 1% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

Water tests from agencies

0 of 3 wells tested since 1970 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2016

State testing program

0% of 17 samples that owners chose to send to a lab (2010–2023) were above the EPA limit of 10 parts per billion.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds arsenic over the limit, the usual fix is the same as for Nitrate (above).

Uranium 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 1993 were above the EPA limit of 30 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1993–2016

State testing program

0% of 12 samples that owners chose to send to a lab (2010–2023) were above the EPA limit of 30 parts per billion.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

If a test finds uranium over the limit, the usual fix is the same as for Nitrate (above).

Coliform Bacteria 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2016 was positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 1 well 0 of 1 Low Too few tests
Everyday water problems
Hardness 11 wells 100% Low Very common

Hard Water across Missouri →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

11 of 11 wells tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2016

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Iron 23 samples 17% Moderate Common

Iron across Missouri →

Brown or orange staining, a metallic taste and clogged fixtures.

State testing program

17.4% of 23 samples that owners chose to send to a lab (2010–2023) were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

Water tests from agencies

1 of 11 wells tested since 1970 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2016

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Chloride 27 samples 0% Moderate Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

State testing program

0% of 27 samples that owners chose to send to a lab (2010–2023) were above the EPA taste guideline of 250 parts per million.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

Water tests from agencies

0 of 1 well tested since 2016 was above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds chloride over the taste or staining level, the usual fix is the same as for Nitrate (above).

Sulfate 27 samples 0% Moderate Rare

A bitter, salty taste.

State testing program

0% of 27 samples that owners chose to send to a lab (2010–2023) were above the EPA taste guideline of 250 parts per million.

Source: Private well samples tested by the Missouri State Public Health Laboratory, 2010–2023

Water tests from agencies

0 of 1 well tested since 2016 was above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds sulfate over the taste or staining level, the usual fix is the same as for Nitrate (above).

Manganese 10 wells 0% Low Rare

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

0 of 10 wells tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2016

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Sodium 1 well 0 of 1 Low Too few tests

A salty taste at higher levels.

Water tests from agencies

0 of 1 well tested since 2016 was above the World Health Organization's taste level of 200 parts per million; 0 of 1 was above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds high sodium, the usual fix is the same as for Nitrate (above).

pH 1 well 0 of 1 Low Too few tests

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

0 of 1 well tested since 2016 was outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Other substances tested
Fluoride 10 wells 0% Low Low risk
PFASacross the county USGS estimate about 12% chance Low Not rated

USGS estimate

USGS estimates about a 12% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Nitrite 1 well 0 of 1 Low Too few tests

Nitrate across Missouri →

Radon 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2016 was above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2016

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 7,700 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 62% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 270 feet deep, and the middle half are 230 to 320 feet deep (from 2,747 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 2002 (from 2,764 state well records). Source: U.S. Groundwater Well Database.
  • About 9% of households on private wells here (about 700 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Missouri DNR cleanup sites.
  • About 100% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Since 2000, FEMA has declared 5 flood or hurricane disasters that included this county, most recently in 2017. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
  • Since 2000, at least half of this county was in drought about 13% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Crawford County

The only way to know what is in your well is to test it. The certified labs nearest Crawford County are listed below. The closest is Water Smart Testing LLC in Rolla, about 24 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for iron.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Water Smart Testing LLC

10510 B Research Drive, Rolla

About 24 miles away · 573-201-6256

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Crawford County

Certified lab Perfect Water Testing

1600 W. Scenic Rivers Blvd., Salem

About 29 miles away · 573-729-6451

Every certified lab in Missouri

These labs serve well owners across Crawford County, including Bourbon, Cuba, Indian Lake, Leasburg, St. Cloud, Steelville and West Sullivan.

These labs are certified by Missouri to test drinking water for bacteria. For other tests, ask the lab what it is certified for. See the state's list.

Rules about testing

  • Missouri has no state disclosure form for sellers and follows "buyer beware". A seller can't lie about the home, but testing the well is up to you. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Crawford County Nursing Service website.

Local health departments

From the Missouri Department of Health and Senior Services, Local Public Health Agency Directory.

Products on this page

Test first, then fix only what your test finds. Certified labs near Crawford County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Nitrate, Arsenic, Uranium, Chloride, Sulfate, Sodium, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Nitrate, Lead, Arsenic, Uranium, Chloride, Sulfate, Sodium, Fluoride, PFAS, Nitrite.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Iron, Manganese.

$4,905–$5,322

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Crawford County can test your water.

Crawford County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Crawford County show:

  • Add this to your website: a free card about wells in Crawford County that updates itself.
  • Download the data behind this page for Missouri. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Crawford County, MO Wells: 17% of 23 Samples High in Iron," https://yourwaterreport.com/states/mo/crawford-county/, data updated November 12, 2026.

Sources and dates

All 16 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Missouri Private Drinking Water (story map), Missouri Department of Health and Senior Services.
  • Hazardous Waste Program Cleanup Sites (E-Start), Missouri Department of Natural Resources.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data