Home › Illinois › Warren County

Warren County, IL Well Water: 68% of 44 Samples High in Iron

Data updated November 10, 2026. Covers private wells, not public water systems.

Print fact sheet

Moderate Risk
Some wells here exceed a health limit Based on 31 samples tested Confidence: Moderate
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Fluoride: A little fluoride protects teeth, but too much can cause white or brown spots on children's teeth, and over many years can weaken bones. It has no color, taste or smell. Source

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

Fixes: If a test finds fluoride or arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Sodium: Sodium makes water taste salty. It matters most for people on a low-salt diet; a water softener also adds sodium.

Chloride: Chloride makes water taste salty and can corrode pipes, fixtures and water heaters.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Sulfate: Sulfate makes water taste bitter and can upset the stomach (a laxative effect) in people who aren't used to it, especially babies. Source

Fixes: If a test finds iron or manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of iron and manganese. If a test finds high sodium, chloride over the taste or staining level or sulfate over the taste or staining level, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Warren County, make sure the test covers:

  • Fluoride
  • Arsenic
  • Iron
  • Sodium
  • Manganese
  • Bacteria and nitrate, every year

What tests found in Warren County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Fluoride 31 samples 3% Moderate Moderate risk

Fluoride across Illinois →

Water tests from agencies

1 of 31 samples tested since 1975 were above the EPA limit of 4 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 1975–2017

Water tests from agencies

0 of 13 wells tested since 1986 were above the EPA limit of 4 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2011

If a test finds fluoride over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenic 13 wells 8% Low Moderate risk

Arsenic across Illinois →

Water tests from agencies

1 of 13 wells tested since 1986 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2011

Water tests from agencies

0 of 5 samples tested since 2004 were above the EPA limit of 10 parts per billion. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2004–2017

USGS estimate

USGS estimates about a 9% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is the same as for Fluoride (above).

Nitrate 7 samples 0% Low Low risk

Nitrate across Illinois →

Water tests from agencies

0 of 7 samples tested since 2000 were above the EPA limit of 10 parts per million (as nitrogen). Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2000–2017

USGS estimate

USGS predicts typical nitrate around 0.3 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

Water tests from agencies

0 of 2 wells tested since 2009 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2009–2011

If a test finds nitrate over the limit, the usual fix is the same as for Fluoride (above).

Lead 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 2009 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2009–2011

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 3 wells 0 of 3 Low Too few tests
Everyday water problems
Iron 44 samples 68% Moderate Very common

Iron across Illinois →

Brown or orange staining, a metallic taste and clogged fixtures.

Water tests from agencies

30 of 44 samples tested since 1970 were above the EPA taste-and-staining guideline of 0.3 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 1970–2017

Water tests from agencies

5 of 13 wells tested since 1986 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2011

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Hardness 8 wells 100% Low Very common

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

8 of 8 wells tested since 1986 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2011

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Sodium 7 samples 29% Low Very common

A salty taste at higher levels.

Water tests from agencies

2 of 7 samples tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 5 of 7 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2000–2017

Water tests from agencies

2 of 2 wells tested since 2009 were above the World Health Organization's taste level of 200 parts per million; 2 of 2 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2009–2011

If a test finds high sodium, the usual fix is the same as for Fluoride (above).

Chloride 7 samples 29% Low Very common

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

2 of 7 samples tested since 2000 were above the EPA taste guideline of 250 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2000–2017

Water tests from agencies

0 of 2 wells tested since 2009 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2009–2011

If a test finds chloride over the taste or staining level, the usual fix is the same as for Fluoride (above).

Manganese 29 samples 21% Moderate Common

Manganese across Illinois →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

6 of 29 samples tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 1970–2017

Water tests from agencies

0 of 8 wells tested since 1986 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1986–2011

USGS estimate

USGS estimates about a 24% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Sulfate 7 samples 14% Low Common

A bitter, salty taste.

Water tests from agencies

1 of 7 samples tested since 2000 were above the EPA taste guideline of 250 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2000–2017

Water tests from agencies

2 of 2 wells tested since 2009 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2009–2011

If a test finds sulfate over the taste or staining level, the usual fix is the same as for Fluoride (above).

pH 2 wells 0 of 2 Low Too few tests

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

0 of 2 wells tested since 2009 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2009–2011

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Other substances tested
PFASacross the county USGS estimate about 6% chance Low Not rated

USGS estimate

USGS estimates about a 6% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Nitrite 2 wells 0 of 2 Low Too few tests

Nitrate across Illinois →

Radon 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2011 was above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2011

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 2,400 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 28% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 190 feet deep, and the middle half are 130 to 250 feet deep (from 1,027 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 1988 (from 1,006 state well records). Source: U.S. Groundwater Well Database.
  • About 22% of households on private wells here (about 540 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Illinois cleanup sites and leaking tanks, Illinois EPA, with U.S. EPA's toxic waste cleanup sites.
  • About 3% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Another 20% has this kind of rock buried deeper underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 1 – highest potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 70% of homes tested here (about 170 homes) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Radon tests by licensed testers, Illinois Emergency Management Agency.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Farms here add more nitrogen (fertilizer and manure) per square mile than 96% of US counties (USGS 2017). Source: USGS county farm nitrogen estimates, 2017.Why it matters: Fertilizer and manure are the main sources of nitrate in well water.
  • Since 2000, at least half of this county was in drought about 18% of the time, most recently with severe drought in 2025. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Warren County

The only way to know what is in your well is to test it. The certified labs nearest Warren County are listed below. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for fluoride, arsenic and iron.

No certified lab is within 30 miles of Warren County. These are the closest. Many labs also take samples by mail: ask the lab for a kit.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Closest certified lab Daily Laboratories

2200 W. Altorfer Drive, Suite B, Peoria

About 52 miles away · 309-691-4513

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Warren County

Certified lab Pace Analytical Services, LLC - Peoria

2231 W. Altorfer Drive, Peoria

About 52 miles away · 309-683-1766

Certified lab QC Analytical Services, LLC

1798 Iowa Drive, Le Claire

About 53 miles away · 563-289-3373

Every certified lab in Illinois

These labs serve well owners across Warren County, including Alexis, Cameron, Kirkwood, Little York, Monmouth and Roseville, and Berwick, Coldbrook, Ellison, Floyd, Greenbush, Hale, Kelly, Lenox, Monmouth, Point Pleasant, Roseville, Spring Grove, Sumner, Swan and Tompkins townships.

These labs are certified by Illinois to test drinking water for bacteria. The state's list is from December 2025, so ask the lab whether its certification is still current. For other tests, ask the lab what it is certified for. See the state's list.

Rules about testing

  • Illinois has no statewide rule that makes you test your own well, even when a home is sold. Your well driller must give you the state's information on testing. Source
  • In Illinois, the well contractor must disinfect a new well and give you information on how to have it tested. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Illinois's 97 local health departments run the private well program for the state; their own rules were not all checked (2026-10-24).

Local help

For up-to-date local news about wells and water testing, check the Warren County Health Department website.

Local health departments

From the Illinois Department of Public Health, Local Health Departments.

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Warren County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Fluoride, Arsenic, Nitrate, Uranium, Sodium, Chloride, Sulfate, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Fluoride, Arsenic, Nitrate, Lead, Uranium, Sodium, Chloride, Sulfate, PFAS, Nitrite.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Iron, Hardness, Manganese.

$4,905–$5,322

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Warren County can test your water.

Warren County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Warren County show:

  • Print or hand out the one-page fact sheet (PDF), with a code that opens this page.
  • Add this to your website: a free card about wells in Warren County that updates itself.
  • Download the data behind this page for Illinois. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Warren County, IL Well Water: 68% of 44 Samples High in Iron," https://yourwaterreport.com/states/il/warren-county/, data updated November 10, 2026.

Sources and dates

All 18 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Site Remediation Program and Leaking Underground Storage Tank incidents, Illinois Environmental Protection Agency; Superfund sites, U.S. EPA.
  • Licensed radon measurements, Illinois Emergency Management Agency and Office of Homeland Security.
  • Groundwater Quality Database, Illinois State Water Survey, Prairie Research Institute, University of Illinois Urbana-Champaign (records request 26-3026, 2026).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data