Home › Illinois › Jasper County

Jasper County, IL Wells: 45% of 38 Samples High in Manganese

Data updated November 12, 2026. Covers private wells, not public water systems.

Print fact sheet

Risk Unknown
Too few health tests to rate Based on 6 wells tested Confidence: Low
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Arsenic and nitrate look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Sulfate: Sulfate makes water taste bitter and can upset the stomach (a laxative effect) in people who aren't used to it, especially babies. Source

Fixes: If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. A water softener, like the Matrixx Smart Metered Water Softener, also handles small amounts of manganese and iron. If a test finds sulfate over the taste or staining level, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Jasper County, make sure the test covers:

  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Jasper County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Arsenic 6 wells 0% Low Low risk

Arsenic across Illinois →

Water tests from agencies

0 of 6 wells tested since 1987 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1987

USGS estimate

USGS estimates about a 5% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

Water tests from agencies

0 of 3 samples tested since 2003 were above the EPA limit of 10 parts per billion. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2003–2017

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Nitrate 5 samples 0% Low Low risk

Nitrate across Illinois →

Water tests from agencies

0 of 5 samples tested since 2001 were above the EPA limit of 10 parts per million (as nitrogen). Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2001–2017

USGS estimate

USGS predicts typical nitrate around 0.4 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

Everyday water problems
Manganese 38 samples 45% Moderate Very common

Manganese across Illinois →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

17 of 38 samples tested since 1972 were above the EPA taste-and-staining guideline of 0.05 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 1972–2017

Water tests from agencies

4 of 6 wells tested since 1987 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1987

USGS estimate

USGS estimates about an 18% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Iron 53 samples 40% Moderate Very common

Iron across Illinois →

Brown or orange staining, a metallic taste and clogged fixtures.

Water tests from agencies

21 of 53 samples tested since 1971 were above the EPA taste-and-staining guideline of 0.3 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 1971–2017

Water tests from agencies

1 of 6 wells tested since 1987 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1987

If a test finds iron over the taste or staining level, the usual fix is the same as for Manganese (above).

Sulfate 5 samples 60% Low Very common

A bitter, salty taste.

Water tests from agencies

3 of 5 samples tested since 2001 were above the EPA taste guideline of 250 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2001–2017

If a test finds sulfate over the taste or staining level, the usual fix is the same as for Arsenic (above).

Sodium 5 samples 0% Low Rare

A salty taste at higher levels.

Water tests from agencies

0 of 5 samples tested since 2001 were above the World Health Organization's taste level of 200 parts per million; 5 of 5 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2001–2017

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Chloride 5 samples 0% Low Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 5 samples tested since 2001 were above the EPA taste guideline of 250 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 2001–2017

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

pH 1 well 0 of 1 Low Too few tests

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

0 of 1 well tested since 2001 was outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2013

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Other substances tested
Fluoride 37 samples 0% Moderate Low risk

Fluoride across Illinois →

Water tests from agencies

0 of 37 samples tested since 1971 were above the EPA limit of 4 parts per million. Some samples may be from public water systems; ISWS has not fully reviewed these records.

Source: Samples tested at the Illinois State Water Survey's lab, 1971–2017

Water tests from agencies

0 of 6 wells tested since 1987 were above the EPA limit of 4 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1987

If a test finds fluoride over the limit, the usual fix is the same as for Arsenic (above).

PFASacross the county USGS estimate about 14% chance Low Not rated

USGS estimate

USGS estimates about a 14% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Jasper County

The only way to know what is in your well is to test it. The certified labs nearest Jasper County are listed below. The closest is Water Lab (EJ Water Coop) in Dieterich, about 13 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for manganese and iron.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Water Lab (EJ Water Coop)

108 South Main Street, Dieterich

About 13 miles away · 217-925-5566

Call a lab first to ask which tests it runs and how to get a sample bottle.

Every certified lab in Illinois

These labs serve well owners across Jasper County, including Hidalgo, Newton, Rose Hill, Ste. Marie, West Liberty, Wheeler, Willow Hill and Yale, and Crooked Creek, Fox, Grandville, Grove, Hunt City, North Muddy, Smallwood, South Muddy, Ste. Marie, Wade and Willow Hill townships.

These labs are certified by Illinois to test drinking water for bacteria. The state's list is from December 2025, so ask the lab whether its certification is still current. For other tests, ask the lab what it is certified for. See the state's list.

Rules about testing

  • Illinois has no statewide rule that makes you test your own well, even when a home is sold. Your well driller must give you the state's information on testing. Source
  • In Illinois, the well contractor must disinfect a new well and give you information on how to have it tested. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Illinois's 97 local health departments run the private well program for the state; their own rules were not all checked (2026-10-24).

Local help

For up-to-date local news about wells and water testing, check the Jasper County Health Department website.

Local health departments

From the Illinois Department of Public Health, Local Health Departments.

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Jasper County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Arsenic, Nitrate, Sulfate, Sodium, Chloride, Fluoride.

$599–$799

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For PFAS.

$1,669–$2,364

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Arsenic, Nitrate, Sulfate, Sodium, Chloride, Fluoride, PFAS.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Manganese, Iron.

$4,905–$5,322

View product →
Another option Matrixx Smart Metered Water Softener

An option for Manganese, Iron.

$1,467–$1,775

View product →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Jasper County can test your water.

Jasper County: Risk UnknownTest your well

For health departments, realtors and groups

Free ways to share what wells in Jasper County show:

  • Print or hand out the one-page fact sheet (PDF), with a code that opens this page.
  • Add this to your website: a free card about wells in Jasper County that updates itself.
  • Download the data behind this page for Illinois. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Jasper County, IL Wells: 45% of 38 Samples High in Manganese," https://yourwaterreport.com/states/il/jasper-county/, data updated November 12, 2026.

Sources and dates

All 17 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Site Remediation Program and Leaking Underground Storage Tank incidents, Illinois Environmental Protection Agency; Superfund sites, U.S. EPA.
  • Groundwater Quality Database, Illinois State Water Survey, Prairie Research Institute, University of Illinois Urbana-Champaign (records request 26-3026, 2026).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data