Data & Methodology — Thomas County

Full contaminant data, sample history, and sourcing for Thomas County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

29 well testing events on record, covering 9 analytes. Data spans 1937 to 2025.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. GA Avg
Iron 3 1974–2015 33%
67% of limit ↑ 62% above
PFOA municipal 6 2023–2024 0%
— —
PFNA municipal 6 2023–2024 0%
— —
Arsenic 3 1974–2015 67%
22% of limit ↑ 262% above
Chloride 27 1938–2015 100%
3% of limit ↑ 54% above
Hardness 23 1938–2015 100%
— ↑ 112% above
PFBS municipal 6 2023–2024 0%
— —
pH 22 1951–2015 100%
— ~ typical
Sodium 20 1938–2015 100%
— ~ typical

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across GA.

Compare your result with Thomas County

Of the 27 chloride tests on record for Thomas County (1938–2015), 0% found none, and half were below 7.18 mg/L.

Of the 21 fluoride tests on record for Thomas County (1938–2015), 0% found none, and half were below 400 µg/L.

Of the 21 nitrate tests on record for Thomas County (1938–2015), 0% found none, and half were below 23 µg/L.

Of the 21 sulfate tests on record for Thomas County (1938–2015), 0% found none, and half were below 6.4 mg/L.

Have a number from your lab? Enter it to see where it falls. Nothing is sent anywhere.

Want the full picture for your well? Check all your results.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Chloride 27 samples
  • Hardness 23 samples
  • pH 22 samples
  • Sodium 20 samples

Limited data (<15 samples) — interpret with caution

  • Iron 3 samples
  • Arsenic 3 samples

No private-well PFAS data for Thomas County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Thomas County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Thomas County

35 Active public water systems
41,584 Residents on public water
30% Households on private wells

Public water systems in Thomas County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in GA with at least one sample for that analyte.

Last updated: 2026-08-04

Full methodology →