No contaminants have been detected in St. Lucie County's groundwater above concerning levels. Well owners in this county have clean water with respect to health-based standards.
The surficial aquifer system here sits in sandy soil and rock that naturally filters water well as it moves underground. The area's land use and geology work together to keep harmful chemicals from building up in the water that wells draw from.
Data on the mineral content of St. Lucie County groundwater is limited, so the exact hardness and iron levels are unknown. The surficial aquifer system typically produces water with moderate mineral content depending on where individual wells draw their water. Well characteristics can vary across the county based on local soil and rock conditions.
St. Lucie County well water data shows no contaminants exceeding EPA health standards and no detected contaminants of concern in the county's tested wells. This is encouraging news for your water quality in this area.
Since no major mineral concerns have been identified in county well data, you may not experience the common problems like hard water staining, scale buildup in pipes, or appliance damage that affect other Florida regions. Your water quality appears to avoid these typical aesthetic issues.
We recommend testing your specific well to understand what is actually in your water, since every well is different and yours may have contaminants at higher or lower levels than what is common in the county. Testing is the only way to know for certain what you're drinking. A basic screen costs between fifty and one hundred dollars and checks for bacteria and nitrate. If you discover any contaminants, treatment options like filtration or water softeners can address them.
Not sure if your well is affected? Get certified results in 5–7 days.
Test Your Well Water with Tap Score →| Contaminant | Samples ⓘ | % Above MCL ⓘ | Distribution ⓘ | Confidence ⓘ | Risk ⓘ |
|---|---|---|---|---|---|
| Radon | 14 | 79% | Low | High ⓘ | |
| PFOS ⓘ municipal | 14 | 43% | Low | High | |
| Iron | 66 | 42% | Moderate | High | |
| Chloride | 578 | 25% | High | High | |
| PFOA ⓘ municipal | 14 | 21% | Low | High | |
| Sulfate | 251 | 5% | High |
Moderate
Elevated concentration, not % above limit
|
|
| Manganese | 44 | 5% | Moderate |
Moderate
Elevated concentration, not % above limit
|
|
| Lead | 44 | 0% | Moderate | Low | |
| Nitrate | 180 | 0% | High | Low | |
| Arsenic | 44 | 0% | Moderate | Low | |
| PFNA ⓘ municipal | 14 | 0% | Low | Safe | |
| PFHxS ⓘ municipal | 14 | 0% | Low | Low | |
| Fluoride | 116 | 0% | High | Low | |
| HFPO-DA (GenX) ⓘ municipal | 14 | 0% | Low | Safe | |
| Nitrite | 175 | 0% | High | Low | |
| Uranium | 14 | 0% | Low | Low | |
| E. coli | 16* | 0% | Moderate | Low | |
| Fecal Coliform | 18* | 0% | Moderate | Low | |
| PFBS ⓘ municipal | 14 | — | Low | Low | |
| Hardness | 220 | — | High | Low | |
| Total Coliform | 34* | 0% | Moderate | Low | |
| pH | 243 | — | High | Low | |
| Sodium | 250 | — | High | Low |
MCL = Maximum Contaminant Level (EPA limit for public water; used as benchmark for private wells). Distribution shows % of sampled wells in each concentration band. Methodology.
* Microbial contaminants (E. coli, coliform) reflect only samples from the last 10 years.
Data shows potential risk — a certified test confirms whether your water is affected.
Order a Tap Score Test →Population-level CDC data. Not individual risk prediction.
Loading recent water news…