Home › Alabama › Jefferson County

Jefferson County, AL Well Water: Test for Manganese & Iron

Data updated November 12, 2026. Covers private wells, not public water systems.

Risk Unknown
Too few health tests to rate Based on a USGS estimate Confidence: Low
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Nitrate and arsenic look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Fixes: If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese and iron. If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Jefferson County, make sure the test covers:

  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Jefferson County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Nitrateacross the county USGS estimate about 0.3 of 10 parts per million Low Low risk

USGS estimate

USGS predicts typical nitrate around 0.3 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

Water tests from agencies

0 of 1 well tested since 2013 was above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013–2022

If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenic 6 wells 0% Low Low risk
Lead 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2013 was above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013–2022

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 1 well 0 of 1 Low Too few tests
Coliform Bacteria 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2022 was positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2022

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 1 well 0 of 1 Low Too few tests
Everyday water problems
Hardness 10 wells 50% Low Very common

Hard Water across Alabama →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

5 of 10 wells tested since 1974 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1974–2022

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Manganese 7 wells 29% Low Very common

Manganese across Alabama →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

2 of 7 wells tested since 1974 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1974–2022

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Iron 10 wells 20% Low Common

Iron across Alabama →

Sodium 1 well 0 of 1 Low Too few tests

A salty taste at higher levels.

Water tests from agencies

0 of 1 well tested since 2013 was above the World Health Organization's taste level of 200 parts per million; 0 of 1 was above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013–2022

If a test finds high sodium, the usual fix is the same as for Nitrate (above).

Chloride 1 well 0 of 1 Low Too few tests

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 1 well tested since 2013 was above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013–2022

If a test finds chloride over the taste or staining level, the usual fix is the same as for Nitrate (above).

Sulfate 1 well 0 of 1 Low Too few tests
pH 1 well 0 of 1 Low Too few tests

pH (Acidic or Basic Water) across Alabama →

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

0 of 1 well tested since 2013 was outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013–2022

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Other substances tested
Fluoride 10 wells 0% Low Low risk
PFASacross the county USGS estimate about 56% chance Low Not rated

USGS estimate

USGS estimates about a 56% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

Less than 1% of households on private wells here (about 150 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Nitrite 1 well 0 of 1 Low Too few tests
Radon 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2013 was above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 25,700 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 1% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • About 8% of households on private wells here (about 2,000 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Alabama ADEM tank cleanup sites.
  • About 21% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 11% of homes tested here (about 630 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.
  • Since 2000, FEMA has declared 9 flood or hurricane disasters that included this county, most recently in 2024. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
  • Since 2000, at least half of this county was in drought about 20% of the time, most recently with severe drought in 2024. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Jefferson County

The only way to know what is in your well is to test it. The certified labs nearest Jefferson County are listed below. The closest is Sutherland Environmental Testing Laboratory in Birmingham, about 7 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for manganese and iron.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Sutherland Environmental Testing Laboratory

2515 Fifth Avenue South, Birmingham

About 7 miles away · 205-581-9500

Certified for chemical tests

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Jefferson County

Certified lab Safety Environmental Services

989 Yeager Parkway, Pelham

About 19 miles away · 205-823-6200

Certified for bacteria tests

Certified lab Guardian Systems

1108 Ashville Road, Leeds

About 20 miles away · 205-699-6647

Certified for bacteria tests

Certified lab Living Water Services

150 Piper Lane, Alabaster

About 26 miles away · 205-985-2113

Certified for bacteria tests

Every certified lab in Alabama

These labs serve well owners across Jefferson County, including Adamsville, Bessemer, Birmingham, Brighton, Brookside, Cardiff, Center Point, Clay, Concord, Edgewater, Fairfield, Forestdale, Fultondale, Gardendale, Grayson Valley, Graysville, Homewood, Hoover, Hueytown, Irondale, Kimberly, Leeds, Lipscomb, Maytown, McCalla, McDonald Chapel, Midfield, Minor, Morris, Mount Olive, Mountain Brook, Mulga, North Johns, Pinson, Pleasant Grove, Rock Creek, Sylvan Springs, Tarrant, Trafford, Trussville, Vestavia Hills, Warrior and West Jefferson.

These labs are certified by Alabama for the tests shown. Before you order, check the state's list for the tests you need. See the state's lists: ADEM Certified Bacteriological Laboratories (bacteria tests); ADEM In-State Certified Chemical Laboratories (chemical tests).

Rules about testing

  • Alabama has no state disclosure form and follows "buyer beware". Testing the well is up to you. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Jefferson County Health Department website.

Local health departments

  • Jefferson County Health Department · 205-933-9110

From the Alabama Department of Public Health, Locations (County Health Departments).

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Jefferson County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Nitrate, Arsenic, Uranium, Sodium, Chloride, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Nitrate, Arsenic, Lead, Uranium, Sodium, Chloride, Sulfate, Fluoride, PFAS, Nitrite.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Manganese, Iron.

$4,905–$5,322

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Jefferson County can test your water.

Jefferson County: Risk UnknownTest your well

For health departments, realtors and groups

Free ways to share what wells in Jefferson County show:

  • Add this to your website: a free card about wells in Jefferson County that updates itself.
  • Download the data behind this page for Alabama. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Jefferson County, AL Well Water: Test for Manganese & Iron," https://yourwaterreport.com/states/al/jefferson-county/, data updated November 12, 2026.

Sources and dates

All 15 data sources and when we retrieved them

Required credits

  • UST and AST Corrective Action Sites, Alabama Department of Environmental Management.
  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.

How we get our numbers · Download the data