Home › Alabama › Colbert County

Colbert County, AL Well Water: Test for Nitrate

Data updated November 12, 2026. Covers private wells, not public water systems.

High Risk
Wells here often exceed a health limit Based on 5 wells tested Confidence: Low
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well now →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Nitrate: Nitrate is most dangerous for babies under 6 months. It can keep their blood from carrying enough oxygen. Use other water for baby formula if your well is high. It has no color, taste or smell. Boiling does not remove it; it makes it stronger. Source

Fixes: If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Arsenic looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Fixes: If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese. If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Colbert County, make sure the test covers:

  • Nitrate
  • Manganese
  • Bacteria and nitrate, every year

What tests found in Colbert County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Nitrate 5 wells 20% Low High risk

Water tests from agencies

1 of 5 wells tested since 2000 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2022

USGS estimate

USGS predicts typical nitrate around 1.0 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenic 6 wells 0% Low Low risk
Uranium 6 wells 0% Low Low risk
Lead 4 wells 0 of 4 Low Too few tests

Water tests from agencies

0 of 4 wells tested since 2003 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2003–2022

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Everyday water problems
Hardness 9 wells 67% Low Very common

Hard Water across Alabama →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

6 of 9 wells tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2022

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Manganese 7 wells 14% Low Common

Manganese across Alabama →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

1 of 7 wells tested since 1999 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1999–2022

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

pH 5 wells 0% Low Rare

pH (Acidic or Basic Water) across Alabama →

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

0 of 5 wells tested since 2000 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2022

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Iron 7 wells 0% Low Rare

Iron across Alabama →

Sodium 5 wells 0% Low Rare

A salty taste at higher levels.

Water tests from agencies

0 of 5 wells tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 0 of 5 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2022

If a test finds high sodium, the usual fix is the same as for Nitrate (above).

Chloride 5 wells 0% Low Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 5 wells tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2022

If a test finds chloride over the taste or staining level, the usual fix is the same as for Nitrate (above).

Sulfate 5 wells 0% Low Rare
Other substances tested
Fluoride 7 wells 0% Low Low risk
Nitrite 5 wells 0% Low Low risk
PFASacross the county USGS estimate about 44% chance Low Not rated

USGS estimate

USGS estimates about a 44% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 9,500 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 7% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • About 5% of households on private wells here (about 510 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Alabama ADEM tank cleanup sites.
  • About 61% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 1 – highest potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 36% of homes tested here (about 580 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Farms here add more nitrogen (fertilizer and manure) per square mile than 58% of US counties (USGS 2017). Source: USGS county farm nitrogen estimates, 2017.Why it matters: Fertilizer and manure are the main sources of nitrate in well water.
  • Since 2000, FEMA has declared 7 flood or hurricane disasters that included this county, most recently in 2024. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
  • Since 2000, at least half of this county was in drought about 20% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Colbert County

The only way to know what is in your well is to test it. The certified labs nearest Colbert County are listed below. The closest is Southern Environmental Testing in Florence, about 14 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for manganese.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Southern Environmental Testing

3103 Northington Court, Florence

About 14 miles away · 256-740-5532

Certified for bacteria tests

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Colbert County

Certified lab Southern Environmental Testing - Florence

3103 Norhtington Court, Florence

About 14 miles away · 256-740-5532

Certified for chemical tests

Every certified lab in Alabama

These labs serve well owners across Colbert County, including Cherokee, Leighton, Littleville, Muscle Shoals, Sheffield and Tuscumbia.

These labs are certified by Alabama for the tests shown. Before you order, check the state's list for the tests you need. See the state's lists: ADEM Certified Bacteriological Laboratories (bacteria tests); ADEM In-State Certified Chemical Laboratories (chemical tests).

Rules about testing

  • Alabama has no state disclosure form and follows "buyer beware". Testing the well is up to you. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Colbert County Health Department website.

Local health departments

  • Colbert County Health Department · 256-383-1231

From the Alabama Department of Public Health, Locations (County Health Departments).

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Colbert County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Nitrate, Arsenic, Uranium, Sodium, Chloride, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Nitrate, Arsenic, Uranium, Lead, Sodium, Chloride, Sulfate, Fluoride, Nitrite, PFAS.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Manganese, Iron.

$4,905–$5,322

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Colbert County can test your water.

Colbert County: High RiskTest your well now

For health departments, realtors and groups

Free ways to share what wells in Colbert County show:

  • Add this to your website: a free card about wells in Colbert County that updates itself.
  • Download the data behind this page for Alabama. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Colbert County, AL Well Water: Test for Nitrate," https://yourwaterreport.com/states/al/colbert-county/, data updated November 12, 2026.

Sources and dates

All 15 data sources and when we retrieved them

Required credits

  • UST and AST Corrective Action Sites, Alabama Department of Environmental Management.
  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.

How we get our numbers · Download the data