Home › States › Wyoming › Manganese

Manganese in Wyoming Well Water

Everyday problem 17 of 23 counties where it is common in tested wells Compared with the EPA taste-and-staining guideline of 0.05 parts per million
Highest Campbell County 53% of 81 well sites high in it
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

County by county

Every Wyoming county where wells were tested for manganese. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For manganese in every state we cover, see our Manganese guide.

CountyHigh in itTestedHow commonConfidence
Albany County24%25 wellsCommonModerate
Big Horn County44%23 wellsVery commonModerate
Campbell County53%81 well sitesVery commonModerate
Carbon County46%129 well sitesVery commonHigh
Converse County35%48 wellsVery commonModerate
Crook County15%20 wellsCommonModerate
Fremont County23%74 wellsCommonModerate
Goshen County8%25 wellsSometimes foundModerate
Hot Springs County20%71 wellsCommonModerate
Johnson County33%15 wellsVery commonLow
Laramie County4%50 well sitesSometimes foundModerate
Lincoln County7%95 wellsSometimes foundModerate
Natrona County21%14 wellsCommonLow
Niobrara County12%25 wellsCommonModerate
Park County27%62 well sitesVery commonModerate
Platte County0%28 wellsRareModerate
Sheridan County20%39 wellsCommonModerate
Sublette County0%41 wellsRareModerate
Sweetwater County31%101 well sitesVery commonHigh
Teton County14%55 well sitesCommonModerate
Uinta County14%7 wellsCommonLow
Washakie County40%10 wellsVery commonLow
Weston County6%18 wellsSometimes foundLow

What it does

Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Where it comes from: It comes naturally from rock underground.

How to test for manganese

A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a manganese test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.

How to remove manganese from well water

Manganese is removed the same ways as iron, and usually together with it. For most homes, an oxidizing filter (such as manganese greensand) is the usual choice; small amounts can be removed by a water softener. Manganese needs a higher pH than iron to be removed, so check your pH first. Until it's fixed, use other water for baby formula if your well is high.

Iron and manganese level (in your test)What usually works
Iron under 1 parts per millionCatalytic carbon filter (the water needs enough dissolved oxygen)
Iron under 5 parts per million, with hard waterWater softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first
Iron and manganese together, 3 to 10 parts per millionOxidizing filter (manganese greensand), cleaned with potassium permanganate
Iron and manganese together, over 10 parts per millionChlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter

In what order

  • Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
  • Treat water where it enters the house, so every tap gets it.
  • If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.

What doesn't fix it

  • A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
  • A softener isn't a filter for iron that has already turned orange: that iron fouls it.

Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.

If your own test shows manganese over the limit, these are common fixes:

An oxidizing filter or a water softener can remove it.

Got your test results?

Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.

Make a treatment plan