Home › Tennessee › Shelby County

Shelby County, TN Wells: 59% of 177 Sites High in Iron

Data updated November 16, 2026. Covers private wells, not public water systems.

Moderate Risk
Some wells here exceed a health limit Based on 144 well sites tested Confidence: High
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

Fixes: If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Fixes: If a test finds iron or manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of iron and manganese. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Shelby County, make sure the test covers:

  • Arsenic
  • Iron
  • Manganese
  • Bacteria and nitrate, every year

What tests found in Shelby County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Arsenic 144 well sites 4% High Moderate risk

Arsenic across Tennessee →

Water tests from agencies

6 of 144 well sites tested since 1976 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1976–2019

USGS estimate

USGS estimates about a 4% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Nitrate 53 well sites 0% Moderate Low risk

Water tests from agencies

0 of 53 well sites tested since 2000 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

USGS estimate

USGS predicts typical nitrate around 0.4 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

Lead 80 well sites 0% Moderate Low risk

Water tests from agencies

0 of 80 well sites tested since 2000 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 51 well sites 0% Moderate Low risk
Coliform Bacteria 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 2019 were positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 2 wells 0 of 2 Low Too few tests
Everyday water problems
Iron 177 well sites 59% High Very common

Iron across Tennessee →

Brown or orange staining, a metallic taste and clogged fixtures.

Water tests from agencies

105 of 177 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2023

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Manganese 174 well sites 41% High Very common

Manganese across Tennessee →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

72 of 174 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2023

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Hardness 186 well sites 39% High Very common

Hard Water across Tennessee →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

72 of 186 well sites tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2023

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

pH 91 well sites 31% Moderate Very common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

28 of 91 well sites tested since 2000 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Sodium 79 well sites 0% Moderate Rare

A salty taste at higher levels.

Water tests from agencies

0 of 79 well sites tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 15 of 79 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Chloride 79 well sites 0% Moderate Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

0 of 79 well sites tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

Sulfate 79 well sites 0% Moderate Rare
Other substances tested
Fluoride 189 well sites 0.5% High Low risk

Fluoride across Tennessee →

Nitrite 53 well sites 0% Moderate Low risk
PFASacross the county USGS estimate about 46% chance Low Not rated

USGS estimate

USGS estimates about a 46% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

Less than 1% of households on private wells here (about 15 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Radon 2 well sites 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 well sites tested since 2013 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2013–2014

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Shelby County

The only way to know what is in your well is to test it. The certified labs nearest Shelby County are listed below. The closest is Eurofins Memphis (former Waypoint LLC) in Memphis, about 3 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for arsenic, iron and manganese.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Eurofins Memphis (former Waypoint LLC)

2790 Whitten Road, Memphis

About 3 miles away · 901-213-2400

Free or low-cost testing

The Tennessee Department of Health offers free water testing for some private wells and springs. Email Waterborne.Health@tn.gov to ask if your well qualifies.

Details

Call a lab first to ask which tests it runs and how to get a sample bottle.

Every certified lab in Tennessee

These labs serve well owners across Shelby County, including Arlington, Bartlett, Collierville, Germantown, Lakeland, Memphis and Millington.

These labs are certified by Tennessee to test drinking water, some for bacteria and some only for chemicals such as metals. Ask the lab which tests it runs for private wells. See the state's list.

Free or low-cost testing

  • The Tennessee Department of Health offers free water testing for some private wells and springs. Email Waterborne.Health@tn.gov to ask if your well qualifies. Source

Rules about testing

Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Shelby County Health Department website.

Local health departments

From the Tennessee Department of Health, Local Health Departments.

State programs

Products on this page

Test first, then fix only what your test finds. Free or low-cost testing and certified labs near Shelby County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Arsenic, Nitrate, Uranium, Sodium, Chloride, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Arsenic, Nitrate, Lead, Uranium, Sodium, Chloride, Sulfate, Fluoride, Nitrite, PFAS.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Iron, Manganese, Hardness.

$4,905–$5,322

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Shelby County can test your water.

Shelby County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Shelby County show:

  • Add this to your website: a free card about wells in Shelby County that updates itself.
  • Download the data behind this page for Tennessee. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Shelby County, TN Wells: 59% of 177 Sites High in Iron," https://yourwaterreport.com/states/tn/shelby-county/, data updated November 16, 2026.

Sources and dates

All 17 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • DOR Sites, Division of Remediation DataViewer, and UST Environmental Activities, Division of Underground Storage Tanks, Tennessee Department of Environment and Conservation.
  • Number of Radon Pre-Mitigation Tests, TDH Health Data, Tennessee Department of Health.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data