Home › States › South Carolina › pH (Acidic or Basic Water)
pH (Acidic or Basic Water) in South Carolina Wells
County by county
Every South Carolina county where wells were tested for pH. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For pH in every state we cover, see our pH (Acidic or Basic Water) guide.
| County | High in it | Tested | How common | Confidence |
|---|---|---|---|---|
| Aiken County | 100% | 5 well sites | Very common | Low |
| Allendale County | 80% | 5 wells | Very common | Low |
| Beaufort County | 0% | 9 wells | Rare | Low |
| Berkeley County | 9% | 11 wells | Sometimes found | Low |
| Charleston County | 33% | 12 well sites | Very common | Low |
| Colleton County | 50% | 12 wells | Very common | Low |
| Hampton County | 43% | 7 wells | Very common | Low |
| Orangeburg County | 53% | 19 well sites | Very common | Low |
| Richland County | 97% | 31 wells | Very common | Moderate |
What it does
Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source
Where it comes from: It depends on the rock and soil around your well.
How to test for pH
A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a pH test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.
- How to test your well: what to test for, mail-in kits and how to take a sample
- Every certified lab in South Carolina, from the state's own list
- What your test results mean, and what to do if a result is over the limit
- pH (Acidic or Basic Water) in well water: our full guide
How to fix acidic (low pH) well water
Most homes fix acidic water with a neutralizing filter: a tank of crushed limestone (calcite) or magnesium oxide that raises the pH as water passes through. Very acidic water, or a home that uses a lot of water, may do better with a pump that adds soda ash instead. Test your tap water for lead and copper too, because acidic water can pull them from pipes.
| Option | What to know |
|---|---|
| Neutralizing filter (calcite or magnesium oxide) | Raises pH and adds some hardness, which helps stop corrosion. The media wears away and has to be refilled every few weeks to months. |
| Chemical feed pump (soda ash) | Adds soda ash before the pressure tank, so it protects the tank and pipes too. It doesn't add hardness, but it adds a little sodium. |
In what order
- Fix pH before an iron filter. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
- Test first-draw tap water (the first water out in the morning) for lead and copper at a certified lab.
Sources: Penn State Extension, Corrosive Water Problems; Penn State Extension, Iron and Manganese in Private Water Systems. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.
If your own test shows pH over the limit, these are common fixes:
- Basic US Water Upflow Calcite pH Neutralizer Filter · $995–$1,195 · NSF/ANSI 42
- Recommended Matrixx pH Balancing Backwashing Filter System · $1,395–$1,595 · NSF/ANSI 42
A neutralizing filter fixes acidic water.
Got your test results?
Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.