Home › Oregon › Washington County

Washington County, OR Wells: 31% of 128 Sites High in Arsenic

Data updated November 12, 2026. Covers private wells, not public water systems.

High Risk
Wells here often exceed a health limit Based on 128 well sites tested Confidence: High
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well now →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

Fixes: If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Chloride: Chloride makes water taste salty and can corrode pipes, fixtures and water heaters.

Fixes: If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese and iron. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. If a test finds chloride over the taste or staining level, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Washington County, make sure the test covers:

  • Arsenic
  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Washington County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Arsenic 128 well sites 31% High High risk

Arsenic across Oregon →

Water tests from agencies

40 of 128 well sites tested since 1975 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1975–2025

State testing program

4.3% of 47 samples tested (1989–2016) were above the EPA limit of 10 parts per billion.

Source: Oregon home-sale well tests (Oregon Health Authority), 1989–2016

USGS estimate

USGS estimates about a 16% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Nitrate 354 samples 1% High Low risk

Nitrate across Oregon →

State testing program

1.4% of 354 samples tested (1989–2016) were above the EPA limit of 10 parts per million (as nitrogen).

Source: Oregon home-sale well tests (Oregon Health Authority), 1989–2016

USGS estimate

USGS predicts typical nitrate around 0.05 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

Water tests from agencies

0 of 1 well tested since 2002 was above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2025

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

Lead 27 wells 0% Moderate Low risk

Water tests from agencies

0 of 27 wells tested since 2002 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2025

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 27 wells 0% Moderate Low risk
Coliform Bacteria 2 wells 2 of 2 Low Too few tests

Coliform Bacteria across Oregon →

Water tests from agencies

2 of 2 wells tested since 2017 were positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2017

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 2 wells 0 of 2 Low Too few tests
Everyday water problems
Manganese 114 well sites 82% High Very common

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

94 of 114 well sites tested since 1975 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1975–2025

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Hardness 117 well sites 66% High Very common

Hard Water across Oregon →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

77 of 117 well sites tested since 1975 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1975–2025

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Iron 117 well sites 48% High Very common

Iron across Oregon →

pH 27 wells 22% Moderate Common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

6 of 27 wells tested since 2002 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2025

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Chloride 30 wells 17% Moderate Common

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

5 of 30 wells tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2025

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

Sodium 27 wells 4% Moderate Sometimes found

A salty taste at higher levels.

Water tests from agencies

1 of 27 wells tested since 2002 were above the World Health Organization's taste level of 200 parts per million; 12 of 27 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2025

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Sulfate 30 wells 0% Moderate Rare
Other substances tested
Fluoride 86 well sites 0% Moderate Low risk
PFASacross the county USGS estimate about 22% chance Low Not rated

USGS estimate

USGS estimates about a 22% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Nitrite 1 well 0 of 1 Low Too few tests

Nitrate across Oregon →

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 9,700 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 9% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 190 feet deep, and the middle half are 110 to 310 feet deep (from 11,792 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 1985 (from 13,181 state well records). Source: U.S. Groundwater Well Database.
  • About 31% of households on private wells here (about 3,000 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Oregon DEQ cleanup sites and leaking tanks.
  • USGS maps no limestone and similar rock with cracks and caves (karst) in this county. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 10% of homes tested here (about 2,400 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.
  • Radon in indoor air, Oregon Health Authority tests: about 13% of homes tested here (about 6,900 homes) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Oregon Health Authority radon test results.
  • Farms here add more nitrogen (fertilizer and manure) per square mile than 55% of US counties (USGS 2017). Source: USGS county farm nitrogen estimates, 2017.Why it matters: Fertilizer and manure are the main sources of nitrate in well water.
  • Since 2000, at least half of this county was in drought about 18% of the time, most recently with severe drought in 2025. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Washington County

The only way to know what is in your well is to test it. The certified labs nearest Washington County are listed below. The closest is Alexin Analytical Laboratories, Inc. in Tigard, about 18 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for arsenic, manganese and iron.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Alexin Analytical Laboratories, Inc.

13035 SW Pacific Hwy, Tigard

About 18 miles away · 503-639-9311

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Washington County

Certified lab Edge Analytical, Inc - Portland

9725 SW Commerce Circle A-1, A-2, Wilsonville

About 22 miles away · 503-682-7802

Certified lab BSK Associates –Vancouver

2517 E Evergreen Blvd, Vancouver

About 22 miles away · 360-750-0055

Certified lab Rose City Laboratories

7200 Johnson Creek Blvd, Portland

About 26 miles away · 503-307-0096

Certified lab Columbia Laboratories Inc.

12423 NE Whitaker Way, Portland

About 27 miles away · 503-254-1794

Every certified lab in Oregon

These labs serve well owners across Washington County, including Aloha, Banks, Beaverton, Bethany, Bull Mountain, Cedar Hills, Cedar Mill, Cherry Grove, Cornelius, Dilley, Durham, Forest Grove, Garden Home-Whitford, Gaston, Hillsboro, King City, Marlene Village, Metzger, North Plains, Oak Hills, Raleigh Hills, Rockcreek, Sherwood, Tigard, Tualatin, West Haven-Sylvan and West Slope.

These labs are accredited in Oregon to test drinking water for nitrate or bacteria. Ask the lab which tests it runs for private wells and how to take the sample. See the state's list.

Rules about testing

  • In Oregon, when a seller accepts an offer on a home with a well, the seller must have the well tested for arsenic, nitrate and bacteria, and give the results to the buyer and the Oregon Health Authority. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Oregon State University Extension, Washington County website.

Local health departments

  • Washington County Public Health Division · 503-846-3594

From the Oregon Health Authority, Local Public Health Authority Directory.

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Washington County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Arsenic, Nitrate, Uranium, Chloride, Sodium, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Arsenic, Nitrate, Lead, Uranium, Chloride, Sodium, Sulfate, Fluoride, PFAS, Nitrite.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Manganese, Hardness, Iron.

$4,905–$5,322

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Washington County can test your water.

Washington County: High RiskTest your well now

For health departments, realtors and groups

Free ways to share what wells in Washington County show:

  • Add this to your website: a free card about wells in Washington County that updates itself.
  • Download the data behind this page for Oregon. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Washington County, OR Wells: 31% of 128 Sites High in Arsenic," https://yourwaterreport.com/states/or/washington-county/, data updated November 12, 2026.

Sources and dates

All 18 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Cleanup All Sites report (Your DEQ Online), Oregon Department of Environmental Quality.
  • Domestic Well Testing Act results by county, Oregon Health Authority, Domestic Well Safety Program.
  • Indoor radon test results (2023 edition), Oregon Health Authority, Radon Program.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data