Home › States › New Mexico › Manganese
Manganese in New Mexico Well Water
County by county
Every New Mexico county where wells were tested for manganese. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For manganese in every state we cover, see our Manganese guide.
| County | High in it | Tested | How common | Confidence |
|---|---|---|---|---|
| Bernalillo County | 21% | 376 well sites | Common | High |
| Catron County | 21% | 76 well sites | Common | Moderate |
| Chaves County | 26% | 34 wells | Very common | Moderate |
| Cibola County | 39% | 180 wells | Very common | High |
| Colfax County | 0% | 7 wells | Rare | Low |
| Curry County | 3% | 37 well sites | Sometimes found | Moderate |
| Doña Ana County | 40% | 333 well sites | Very common | High |
| Eddy County | 59% | 56 well sites | Very common | Moderate |
| Grant County | 17% | 6 wells | Common | Low |
| Guadalupe County | 71% | 7 wells | Very common | Low |
| Harding County | 5% | 21 wells | Sometimes found | Moderate |
| Hidalgo County | 12% | 24 wells | Common | Moderate |
| Lea County | 18% | 27 well sites | Common | Moderate |
| Lincoln County | 22% | 32 well sites | Common | Moderate |
| Luna County | 6% | 36 wells | Sometimes found | Moderate |
| McKinley County | 21% | 87 well sites | Common | Moderate |
| Otero County | 14% | 84 well sites | Common | Moderate |
| Rio Arriba County | 33% | 24 wells | Very common | Moderate |
| Roosevelt County | 21% | 33 well sites | Common | Moderate |
| San Juan County | 45% | 107 well sites | Very common | High |
| Sandoval County | 32% | 83 well sites | Very common | Moderate |
| Santa Fe County | 8% | 132 well sites | Sometimes found | High |
| Sierra County | 28% | 29 well sites | Very common | Moderate |
| Socorro County | 35% | 83 wells | Very common | Moderate |
| Taos County | 4% | 50 wells | Sometimes found | Moderate |
| Torrance County | 12% | 8 wells | Common | Low |
| Union County | 0% | 5 wells | Rare | Low |
| Valencia County | 27% | 37 wells | Very common | Moderate |
What it does
Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source
Where it comes from: It comes naturally from rock underground.
How to test for manganese
A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a manganese test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.
- How to test your well: what to test for, mail-in kits and how to take a sample
- Every certified lab in New Mexico, from the state's own list
- What your test results mean, and what to do if a result is over the limit
- Manganese in well water: our full guide
How to remove manganese from well water
Manganese is removed the same ways as iron, and usually together with it. For most homes, an oxidizing filter (such as manganese greensand) is the usual choice; small amounts can be removed by a water softener. Manganese needs a higher pH than iron to be removed, so check your pH first. Until it's fixed, use other water for baby formula if your well is high.
| Iron and manganese level (in your test) | What usually works |
|---|---|
| Iron under 1 parts per million | Catalytic carbon filter (the water needs enough dissolved oxygen) |
| Iron under 5 parts per million, with hard water | Water softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first |
| Iron and manganese together, 3 to 10 parts per million | Oxidizing filter (manganese greensand), cleaned with potassium permanganate |
| Iron and manganese together, over 10 parts per million | Chlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter |
In what order
- Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
- Treat water where it enters the house, so every tap gets it.
- If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.
What doesn't fix it
- A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
- A softener isn't a filter for iron that has already turned orange: that iron fouls it.
Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.
If your own test shows manganese over the limit, these are common fixes:
- Basic iSpring WGB32BM Whole House Iron & Manganese Filter · see price on Amazon · Iron and manganese reduction (iron up to 3 ppm)
- Recommended Matrixx InFusion Iron & Sulfur Eradication System · $3,295–$3,395 · NSF/ANSI 42
- Comprehensive Matrixx Ultimate Iron, Sulfur & Softening System · $4,905–$5,322 · NSF/ANSI 42/44
- Also works Matrixx Smart Metered Water Softener · $1,467–$1,775 · NSF/ANSI 44
An oxidizing filter or a water softener can remove it.
Got your test results?
Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.