Home › States › North Carolina › Manganese

Manganese in North Carolina Well Water

Everyday problem 31 of 34 counties where it is common in tested wells Compared with the EPA taste-and-staining guideline of 0.05 parts per million
Highest Craven County 83% of 41 well sites high in it
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

County by county

Every North Carolina county where wells were tested for manganese. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For manganese in every state we cover, see our Manganese guide.

CountyHigh in itTestedHow commonConfidence
Ashe County0%5 wellsRareLow
Beaufort County65%17 wellsVery commonLow
Bertie County20%5 wellsCommonLow
Bladen County25%8 wellsVery commonLow
Brunswick County38%58 well sitesVery commonModerate
Buncombe County9%11 well sitesSometimes foundLow
Carteret County33%12 wellsVery commonLow
Craven County83%41 well sitesVery commonModerate
Dare County43%7 well sitesVery commonLow
Duplin County40%10 wellsVery commonLow
Edgecombe County35%17 well sitesVery commonLow
Gaston County17%6 wellsCommonLow
Greene County64%25 well sitesVery commonModerate
Guilford County12%24 wellsCommonModerate
Hertford County83%6 wellsVery commonLow
Iredell County17%6 well sitesCommonLow
Jones County0%6 wellsRareLow
Lee County31%42 wellsVery commonModerate
Lenoir County29%7 wellsVery commonLow
Lincoln County22%18 wellsCommonLow
Mecklenburg County67%42 well sitesVery commonModerate
New Hanover County35%52 well sitesVery commonModerate
Onslow County28%29 well sitesVery commonModerate
Orange County26%46 wellsVery commonModerate
Pamlico County43%7 well sitesVery commonLow
Pasquotank County57%7 wellsVery commonLow
Pender County42%12 well sitesVery commonLow
Pitt County13%15 well sitesCommonLow
Rockingham County33%9 well sitesVery commonLow
Sampson County30%27 well sitesVery commonModerate
Wake County68%19 well sitesVery commonLow
Washington County50%8 wellsVery commonLow
Watauga County20%5 wellsCommonLow
Wayne County33%15 well sitesVery commonLow

What it does

Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Where it comes from: It comes naturally from rock underground.

How to test for manganese

A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a manganese test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.

How to remove manganese from well water

Manganese is removed the same ways as iron, and usually together with it. For most homes, an oxidizing filter (such as manganese greensand) is the usual choice; small amounts can be removed by a water softener. Manganese needs a higher pH than iron to be removed, so check your pH first. Until it's fixed, use other water for baby formula if your well is high.

Iron and manganese level (in your test)What usually works
Iron under 1 parts per millionCatalytic carbon filter (the water needs enough dissolved oxygen)
Iron under 5 parts per million, with hard waterWater softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first
Iron and manganese together, 3 to 10 parts per millionOxidizing filter (manganese greensand), cleaned with potassium permanganate
Iron and manganese together, over 10 parts per millionChlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter

In what order

  • Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
  • Treat water where it enters the house, so every tap gets it.
  • If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.

What doesn't fix it

  • A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
  • A softener isn't a filter for iron that has already turned orange: that iron fouls it.

Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.

If your own test shows manganese over the limit, these are common fixes:

An oxidizing filter or a water softener can remove it.

Got your test results?

Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.

Make a treatment plan