Home › Maine › York County

York County, ME Wells: 23% of 2,174 Wells High in Arsenic

Data updated November 15, 2026. Covers private wells, not public water systems.

Print fact sheet

High Risk
Wells here often exceed a health limit Based on 2,174 wells tested Confidence: High
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well now →Mail-in kit sold on Amazon, results in about a weekAdd a PFAS testFind a certified lab

What this means for you

Your health

Arsenic: Drinking water with arsenic for many years can cause skin problems and raises the risk of some cancers, including skin, bladder and lung cancer. It has no color, taste or smell. Source

PFAS: PFAS are man-made chemicals that do not break down. Drinking them for years is linked to some cancers, a weaker immune system, high cholesterol and lower birth weight. You can't see, smell or taste them, so a lab test is the only way to know. Source

Fluoride: A little fluoride protects teeth, but too much can cause white or brown spots on children's teeth, and over many years can weaken bones. It has no color, taste or smell. Source

Fixes: If a test finds arsenic or fluoride over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. If a test finds PFOA over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System. All products on this page.

Nitrate looks unlikely here, but it has no taste or smell, so it is still worth a test.

Everyday problems

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Chloride: Chloride makes water taste salty and can corrode pipes, fixtures and water heaters.

Fixes: If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of iron. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. If a test finds chloride over the taste or staining level, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in York County, make sure the test covers:

  • Arsenic
  • PFAS
  • PFAS (6 Added Together)
  • Fluoride
  • Iron
  • Bacteria and nitrate, every year

What tests found in York County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Arsenic 2,174 wells 23% High High risk

Arsenic across Maine →

State testing program

23.1% of 2,174 wells tested by owners who sent samples to a state lab (1999–2019) were above the EPA limit of 10 parts per billion.

Source: Well water test results, Maine Tracking Network, 1999–2019

Water tests from agencies

12 of 19 well sites tested since 1997 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1997–2019

USGS estimate

USGS estimates about a 19% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

PFOANear Fields Where Sludge Was Spread 417 wells 10% High Moderate risk

PFAS ("Forever Chemicals") across Maine →

Water tests from agencies

41 of 417 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2017 were above the EPA limit of 4 parts per trillion. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2017–2026

Water tests from agencies

0 of 1 well tested since 2019 was above the EPA limit of 4 parts per trillion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

About 1% of households on private wells here (about 370 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFOA over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364).

PFOSNear Fields Where Sludge Was Spread 417 wells 7% High Moderate risk

PFAS ("Forever Chemicals") across Maine →

Water tests from agencies

29 of 417 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2017 were above the EPA limit of 4 parts per trillion. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2017–2026

Water tests from agencies

1 of 1 well tested since 2019 was above the EPA limit of 4 parts per trillion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFOS over the limit, the usual fix is the same as for PFOA (above).

PFAS (6 Added Together)Near Fields Where Sludge Was Spread 417 wells 5% High Moderate risk

Water tests from agencies

19 of 417 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2017 were above Maine's limit of 20 parts per trillion for six PFAS added together. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2017–2026

If a test finds six PFAS added together over the limit, the usual fix is the same as for PFOA (above).

Fluoride 2,695 wells 3% High Moderate risk

Fluoride across Maine →

State testing program

2.7% of 2,695 wells tested by owners who sent samples to a state lab (1999–2019) were above Maine's health guideline of 2 parts per million.

Source: Well water test results, Maine Tracking Network, 1999–2019

Water tests from agencies

0 of 23 well sites tested since 1970 were above the EPA limit of 4 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

If a test finds fluoride over the limit, the usual fix is the same as for Arsenic (above).

Uranium 1,835 wells 2% High Low risk

Uranium across Maine →

State testing program

1.8% of 1,835 wells tested by owners who sent samples to a state lab (1999–2019) were above the EPA limit of 30 parts per billion.

Source: Well water test results, Maine Tracking Network, 1999–2019

Water tests from agencies

0 of 13 wells tested since 1999 were above the EPA limit of 30 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1999–2019

If a test finds uranium over the limit, the usual fix is the same as for Arsenic (above).

PFHxSNear Fields Where Sludge Was Spread 417 wells 1% High Low risk

PFAS ("Forever Chemicals") across Maine →

Water tests from agencies

6 of 417 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2017 were above the EPA limit of 10 parts per trillion (the EPA has proposed removing it); 153 of 417 were found to contain PFHxS. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2017–2026

Water tests from agencies

0 of 1 well tested since 2019 was above the EPA limit of 10 parts per trillion (the EPA has proposed removing it); 1 of 1 was found to contain PFHxS.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFHxS over the limit, the usual fix is the same as for PFOA (above).

Nitrate 2,517 wells 0.7% High Low risk

Nitrate across Maine →

State testing program

0.7% of 2,517 wells tested by owners who sent samples to a state lab (1999–2019) were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water test results, Maine Tracking Network, 1999–2019

Water tests from agencies

0 of 13 wells tested since 2000 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

USGS estimate

USGS predicts typical nitrate around 0.05 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

Lead 13 wells 0% Low Low risk
Coliform Bacteria 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2019 was positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 1 well 0 of 1 Low Too few tests
Everyday water problems
Iron 52 well sites 35% Moderate Very common

Brown or orange staining, a metallic taste and clogged fixtures.

Water tests from agencies

18 of 52 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Hardness 49 well sites 14% Moderate Common

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

7 of 49 well sites tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

pH 16 wells 19% Low Common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

3 of 16 wells tested since 2000 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Chloride 8 wells 12% Low Common

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

1 of 8 wells tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

Manganese 1,968 wells 4% High Sometimes found

Black or brown staining and a bitter, metallic taste.

State testing program

4.5% of 1,968 wells tested by owners who sent samples to a state lab (1999–2019) were above Maine's health guideline of 0.3 parts per million.

Source: Well water test results, Maine Tracking Network, 1999–2019

Water tests from agencies

31 of 47 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2019

USGS estimate

USGS estimates about a 16% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Sodium 13 wells 8% Low Sometimes found

A salty taste at higher levels.

Water tests from agencies

1 of 13 wells tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 8 of 13 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Sulfate 15 wells 0% Low Rare
Other substances tested
Radon 5 wells 20% Low High risk

Water tests from agencies

1 of 5 wells tested since 2000 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2001

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

Nitrite 2,518 wells 0% High Low risk

Nitrate across Maine →

State testing program

0% of 2,518 wells tested by owners who sent samples to a state lab (1999–2019) were above the EPA limit of 1 part per million (as nitrogen).

Source: Well water test results, Maine Tracking Network, 1999–2019

Water tests from agencies

0 of 13 wells tested since 2000 were above the EPA limit of 1 part per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2019

If a test finds nitrite over the limit, the usual fix is the same as for Arsenic (above).

PFBSNear Fields Where Sludge Was Spread 417 wells 0% High Low risk

Water tests from agencies

0 of 417 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2017 were above the EPA health advisory level of 2,000 parts per trillion; 216 of 417 were found to contain PFBS. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2017–2026

Water tests from agencies

0 of 1 well tested since 2019 was above the EPA health advisory level of 2,000 parts per trillion; 1 of 1 was found to contain PFBS.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFBS over the limit, the usual fix is the same as for PFOA (above).

GenXNear Fields Where Sludge Was Spread 414 wells 0% High Low risk

Water tests from agencies

0 of 414 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2019 were above the EPA limit of 10 parts per trillion (the EPA has proposed removing it); 0 of 414 were found to contain GenX. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2019–2026

If a test finds GenX over the limit, the usual fix is the same as for PFOA (above).

PFBANear Fields Where Sludge Was Spread 416 wells found in 40% High Not rated

Water tests from agencies

167 of 416 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2019 were found to contain PFBA. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2019–2026

Water tests from agencies

0 of 1 well tested since 2019 was found to contain PFBA.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFBA over the limit, the usual fix is the same as for PFOA (above).

PFHxANear Fields Where Sludge Was Spread 416 wells found in 38% High Not rated

Water tests from agencies

160 of 416 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2019 were found to contain PFHxA. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2019–2026

Water tests from agencies

1 of 1 well tested since 2019 was found to contain PFHxA.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFHxA over the limit, the usual fix is the same as for PFOA (above).

PFPeANear Fields Where Sludge Was Spread 416 wells found in 37% High Not rated

Water tests from agencies

155 of 416 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2019 were found to contain PFPeA. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2019–2026

Water tests from agencies

0 of 1 well tested since 2019 was found to contain PFPeA.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFPeA over the limit, the usual fix is the same as for PFOA (above).

PFHpANear Fields Where Sludge Was Spread 417 wells found in 36% High Not rated

Water tests from agencies

150 of 417 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2017 were found to contain PFHpA. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2017–2026

Water tests from agencies

1 of 1 well tested since 2019 was found to contain PFHpA.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFHpA over the limit, the usual fix is the same as for PFOA (above).

PFDANear Fields Where Sludge Was Spread 416 wells found in 2% High Not rated

Water tests from agencies

9 of 416 wells tested by Maine's PFAS sampling of home wells near fields where sludge was spread since 2019 were found to contain PFDA. These homes were tested because they are near fields where sewage sludge or septage was spread, which can carry PFAS.

Source: PFAS tests of wells near sludge spreading sites, Maine DEP, 2019–2026

Water tests from agencies

0 of 1 well tested since 2019 was found to contain PFDA.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2019

If a test finds PFDA over the limit, the usual fix is the same as for PFOA (above).

PFASacross the county USGS estimate about 37% chance Low Not rated

PFAS ("Forever Chemicals") across Maine →

USGS estimate

USGS estimates about a 37% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

If a test finds PFAS over the limit, the usual fix is the same as for PFOA (above).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Your town

Find your town

Type your town or ZIP code to see its results and find it on the map.

These results come from wells tested by owners who sent samples to a state lab, town by town. Pick a test to color the map, or tap a town to find it in the table.

How to read the table: each number is the share of wells tested in that town that were over the limit. The small number under it is how many wells were tested. A dash means fewer than ten wells were tested, so the state does not report it. Tap a column name to sort. Source: Well water test results, Maine Tracking Network.

Town ArsenicFluorideManganeseNitrateNitriteUranium
Acton 2.8%of 36 wells 0.0%of 60 wells 2.9%of 34 wells 0.0%of 43 wells 0.0%of 43 wells 0.0%of 29 wells
Alfred 7.1%of 28 wells 0.0%of 48 wells 12.5%of 24 wells 0.0%of 34 wells 0.0%of 34 wells 0.0%of 23 wells
Arundel 28.6%of 63 wells 5.6%of 89 wells 3.9%of 51 wells 0.0%of 81 wells 0.0%of 81 wells 1.9%of 52 wells
Berwick 12.3%of 65 wells 0.0%of 71 wells 10.7%of 56 wells 0.0%of 65 wells 0.0%of 65 wells 0.0%of 52 wells
Biddeford 28.8%of 59 wells 8.0%of 75 wells 5.6%of 54 wells 0.0%of 68 wells 0.0%of 68 wells 2.1%of 47 wells
Buxton 42.0%of 317 wells 1.1%of 361 wells 3.4%of 266 wells 1.0%of 310 wells 0.0%of 310 wells 0.8%of 255 wells
Cornish 8.7%of 23 wells 3.7%of 27 wells 4.3%of 23 wells 0.0%of 27 wells 0.0%of 27 wells 0.0%of 23 wells
Dayton 35.9%of 64 wells 1.2%of 84 wells 1.7%of 58 wells 0.0%of 81 wells 0.0%of 81 wells 3.7%of 54 wells
Eliot 46.1%of 89 wells 0.0%of 96 wells 2.2%of 89 wells 0.0%of 107 wells 0.0%of 108 wells 0.0%of 77 wells
Hollis 42.9%of 133 wells 3.9%of 155 wells 0.9%of 109 wells 0.0%of 127 wells 0.0%of 127 wells 7.1%of 98 wells
Kennebunk 13.7%of 73 wells 15.2%of 92 wells 0.0%of 67 wells 2.6%of 78 wells 0.0%of 78 wells 0.0%of 60 wells
Kennebunkport 13.8%of 29 wells 2.4%of 41 wells 0.0%of 28 wells 0.0%of 45 wells 0.0%of 45 wells 0.0%of 26 wells
Kittery 14.3%of 42 wells 0.0%of 48 wells 0.0%of 41 wells 2.3%of 43 wells 0.0%of 43 wells 0.0%of 39 wells
Lebanon 5.8%of 69 wells 4.0%of 99 wells 9.1%of 66 wells 0.0%of 89 wells 1.1%of 89 wells 0.0%of 64 wells
Limerick 18.2%of 44 wells 0.0%of 59 wells 9.1%of 44 wells 1.7%of 58 wells 0.0%of 58 wells 0.0%of 41 wells
Limington 24.3%of 107 wells 3.2%of 126 wells 5.5%of 91 wells 0.0%of 107 wells 0.0%of 107 wells 11.4%of 88 wells
Lyman 6.2%of 81 wells 1.4%of 141 wells 2.5%of 79 wells 0.0%of 100 wells 0.0%of 100 wells 0.0%of 69 wells
Newfield 26.3%of 38 wells 2.6%of 39 wells 6.3%of 32 wells 2.6%of 39 wells 0.0%of 39 wells 0.0%of 34 wells
North Berwick 22.9%of 35 wells 0.0%of 50 wells 5.9%of 34 wells 2.0%of 51 wells 0.0%of 51 wells 0.0%of 28 wells
Ogunquit ––––––
Old Orchard Beach ––––––
Parsonsfield 13.6%of 44 wells 2.0%of 51 wells 7.3%of 41 wells 0.0%of 51 wells 0.0%of 51 wells 10.5%of 38 wells
Saco 34.8%of 230 wells 1.2%of 253 wells 3.0%of 203 wells 1.1%of 267 wells 0.0%of 267 wells 0.0%of 197 wells
Sanford 7.7%of 65 wells 0.0%of 84 wells 10.3%of 58 wells 0.0%of 68 wells 0.0%of 68 wells 0.0%of 60 wells
Shapleigh 14.6%of 48 wells 0.0%of 58 wells 4.4%of 45 wells 0.0%of 57 wells 0.0%of 57 wells 2.4%of 42 wells
South Berwick 13.2%of 38 wells 6.5%of 46 wells 0.0%of 36 wells 3.8%of 52 wells 0.0%of 52 wells 3.3%of 30 wells
Waterboro 9.0%of 100 wells 0.0%of 137 wells 5.2%of 96 wells 0.0%of 121 wells 0.0%of 121 wells 4.3%of 92 wells
Wells 2.3%of 132 wells 4.2%of 168 wells 3.9%of 129 wells 0.0%of 159 wells 0.0%of 159 wells 0.0%of 113 wells
York 2.9%of 105 wells 8.4%of 119 wells 12.4%of 97 wells 1.8%of 168 wells 0.0%of 168 wells 0.0%of 87 wells

About wells here

  • About 36,600 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 34% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 280 feet deep, and the middle half are 180 to 400 feet deep (from 9,933 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 2003 (from 9,953 state well records). Source: U.S. Groundwater Well Database.
  • About 11% of households on private wells here (about 3,900 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Maine cleanup sites, Maine DEP (with EPA's leaking fuel tank records).
  • About 1% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Another small part (less than 1%) has this kind of rock buried deeper underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 1 – highest potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 44% of homes tested here (about 6,300 homes) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests, Maine Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Since 2000, FEMA has declared 5 flood or hurricane disasters that included this county, most recently in 2023. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.
  • Since 2000, at least half of this county was in drought about 20% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in York County

The only way to know what is in your well is to test it. The certified labs nearest York County are listed below. The closest is Nelson Analytical Lab in Kennebunk, about 7 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for arsenic, PFAS and pfas (6 added together).

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Order a test kit Tap Score PFAS Water Test

A mail-in lab test for 18 PFAS (forever chemicals), including PFOA and PFOS.

Sold on Amazon · mailed to your home

Order a PFAS Test →
Nearest certified lab Nelson Analytical Lab

Kennebunk

About 7 miles away · 207-467-3478

Certified for drinking water tests

Free or low-cost testing

If you get MaineCare, SNAP, TANF or other benefits, Maine CDC will send you a free well water test kit from the state lab. Ask for it on Maine CDC's online well water request form.

Details

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near York County

Certified lab Katahdin Analytical Services

Scarborough

About 19 miles away · 207-874-2400

Certified for drinking water tests

Certified lab Eurofins Portland ME

Portland

About 28 miles away · 207-846-6569

Certified for drinking water tests

Every certified lab in Maine

These labs serve well owners across York County, including Acton, Alfred, Arundel, Berwick, Biddeford, Buxton, Cape Neddick, Cornish, Dayton, Eliot, Hollis, Kennebunk, Kennebunkport, Kezar Falls, Kittery, Kittery Point, Lake Arrowhead, Lebanon, Limerick, Limington, Lyman, Newfield, North Berwick, Ogunquit, Old Orchard Beach, Parsonsfield, Saco, Sanford, Shapleigh, South Berwick, South Eliot, Waterboro, Wells, West Kennebunk, York and York Harbor.

These labs are certified by Maine for the tests shown. Before you order, check the state's list for the tests you need. See the state's list.

Free or low-cost testing

  • If you get MaineCare, SNAP, TANF or other benefits, Maine CDC will send you a free well water test kit from the state lab. Ask for it on Maine CDC's online well water request form. Source

Rules about testing

  • Maine does not require a water test when a home is sold, but the seller must tell the buyer the date of the last water test and about any bad test or test that found PFAS. Source
  • In Maine, a landlord must test each private well that serves tenants every 5 years for arsenic and the other substances on Maine CDC's testing list, which now includes PFAS, and give tenants the results within 10 days. Source
  • In Maine, your well driller must give you information about testing a new well. No law requires the test itself. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Maine's towns have no health departments of their own; local rules for well testing were not found (2026-10-24).

Local help

State programs

Products on this page

Test first, then fix only what your test finds. Free or low-cost testing and certified labs near York County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Test kit Tap Score PFAS Water Test

A mail-in lab test for 18 PFAS (forever chemicals), including PFOA and PFOS.

Sold on Amazon · mailed to your home

Order a PFAS Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Arsenic, Fluoride, Uranium, Nitrate, Chloride, Sodium, Sulfate, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For PFOA, PFOS, PFAS (6 Added Together), PFHxS, Lead, PFBS, GenX, PFBA, PFHxA, PFPeA, PFHpA, PFDA, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Arsenic, PFOA, PFOS, PFAS (6 Added Together), Fluoride, Uranium, PFHxS, Nitrate, Lead, Chloride, Sodium, Sulfate, Nitrite, PFBS, GenX, PFBA, PFHxA, PFPeA, PFHpA, PFDA, PFAS.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Iron, Hardness, Manganese.

$4,905–$5,322

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near York County can test your water.

York County: High RiskTest your well now

For health departments, realtors and groups

Free ways to share what wells in York County show:

  • Print or hand out the one-page fact sheet (PDF), with a code that opens this page.
  • Add this to your website: a free card about wells in York County that updates itself.
  • Download the data behind this page for Maine. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "York County, ME Wells: 23% of 2,174 Wells High in Arsenic," https://yourwaterreport.com/states/me/york-county/, data updated November 15, 2026.

Sources and dates

All 20 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Maine Center for Disease Control and Prevention, Maine Tracking Network. Radon in Air Test Results.
  • Maine Center for Disease Control and Prevention, Maine Tracking Network. Private Well Water: Water Quality.
  • Maine Center for Disease Control and Prevention, Maine Tracking Network. Private Well Water: Water Quality.
  • PFAS Groundwater Results, Maine Department of Environmental Protection PFAS Investigation.
  • Remediation Sites, Maine Department of Environmental Protection; leaking underground storage tanks, U.S. EPA UST Finder.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data