Home › Maryland › Cecil County

Cecil County, MD Wells: 40% of 104 Sites High in Iron

Data updated November 12, 2026. Covers private wells, not public water systems.

Print fact sheet

Low Risk
Few tested wells exceed a health limit Based on 82 well sites tested Confidence: Moderate
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Arsenic and nitrate look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Chloride: Chloride makes water taste salty and can corrode pipes, fixtures and water heaters.

Sulfate: Sulfate makes water taste bitter and can upset the stomach (a laxative effect) in people who aren't used to it, especially babies. Source

Sodium: Sodium makes water taste salty. It matters most for people on a low-salt diet; a water softener also adds sodium.

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Fixes: If a test finds iron or manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. If a test finds chloride over the taste or staining level, sulfate over the taste or staining level or high sodium, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of iron and manganese. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Cecil County, make sure the test covers:

  • Iron
  • Manganese
  • Sodium
  • Bacteria and nitrate, every year

What tests found in Cecil County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Arsenic 82 well sites 1% Moderate Low risk

Arsenic across Maryland →

Water tests from agencies

1 of 82 well sites tested since 1981 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1981–2022

USGS estimate

USGS estimates about a 3% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Lead 34 well sites 0% Moderate Low risk

Water tests from agencies

0 of 34 well sites tested since 2001 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2022

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Uranium 31 well sites 0% Moderate Low risk
Nitrate 13 wells 0% Low Low risk

Nitrate across Maryland →

Water tests from agencies

0 of 13 wells tested since 2001 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2022

USGS estimate

USGS predicts typical nitrate around 1.3 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Arsenic (above).

Coliform Bacteria 1 well 0 of 1 Low Too few tests

Water tests from agencies

0 of 1 well tested since 2022 was positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2022

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 1 well 0 of 1 Low Too few tests
Everyday water problems
Iron 104 well sites 40% High Very common

Iron across Maryland →

Brown or orange staining, a metallic taste and clogged fixtures.

Water tests from agencies

42 of 104 well sites tested since 1978 were above the EPA taste-and-staining guideline of 0.3 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1978–2022

If a test finds iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

pH 37 well sites 70% Moderate Very common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

26 of 37 well sites tested since 2001 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2022

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Manganese 96 well sites 40% Moderate Very common

Manganese across Maryland →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

38 of 96 well sites tested since 1978 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1978–2022

If a test finds manganese over the taste or staining level, the usual fix is the same as for Iron (above).

Chloride 34 well sites 29% Moderate Very common

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

10 of 34 well sites tested since 2001 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2022

If a test finds chloride over the taste or staining level, the usual fix is the same as for Arsenic (above).

Sulfate 29 well sites 24% Moderate Common
Sodium 36 well sites 22% Moderate Common

A salty taste at higher levels.

Water tests from agencies

8 of 36 well sites tested since 2001 were above the World Health Organization's taste level of 200 parts per million; 19 of 36 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2022

If a test finds high sodium, the usual fix is the same as for Arsenic (above).

Hardness 92 well sites 16% Moderate Common

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

15 of 92 well sites tested since 1978 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1978–2022

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Other substances tested
Radon 6 wells 17% Low High risk

Radon across Maryland →

Water tests from agencies

1 of 6 wells tested since 2001 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2001–2020

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

Fluoride 110 well sites 0% High Low risk
Nitrite 33 well sites 0% Moderate Low risk

Nitrate across Maryland →

PFASacross the county USGS estimate about 31% chance Low Not rated

USGS estimate

USGS estimates about a 31% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

About 2% of households on private wells here (about 390 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 16,200 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 61% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 170 feet deep, and the middle half are 110 to 250 feet deep (from 18,066 state well records). Source: U.S. Groundwater Well Database.
  • Half of the private wells on record here were drilled by 1992 (from 18,065 state well records). Source: U.S. Groundwater Well Database.
  • About 11% of households on private wells here (about 1,700 homes) live within 1 mile of groundwater pollution on the state's list or a Superfund site (the EPA's list of the most serious toxic waste sites). That does not mean their wells are affected, but it is a good reason to test. Source: Maryland cleanup sites with groundwater contamination, MDE.
  • USGS maps no limestone and similar rock with cracks and caves (karst) in this county. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 2 – moderate potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Radon in indoor air: about 25% of homes tested here (about 830 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Farms here add more nitrogen (fertilizer and manure) per square mile than 58% of US counties (USGS 2017). Source: USGS county farm nitrogen estimates, 2017.Why it matters: Fertilizer and manure are the main sources of nitrate in well water.
  • Since 2000, at least half of this county was in drought about 11% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Cecil County

The only way to know what is in your well is to test it. The certified labs nearest Cecil County are listed below. The closest is Community Environmental Laboratories, Inc in Aberdeen, about 13 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for iron, manganese and sodium.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Community Environmental Laboratories, Inc

1202 Technology Drive, Suite F, Aberdeen

About 13 miles away · 410-273-7600

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Cecil County

Certified lab Home Land Labs - Forest Hill

2216 Commerce Road, Forest Hill

About 22 miles away · 443-969-1649

Certified lab Brandywine Science Center

204 Line Road, Kennet Square

About 23 miles away · 610-444-9850

Every certified lab in Maryland

These labs serve well owners across Cecil County, including Cecilton, Charlestown, Chesapeake City, Elkton, North East, Perryville, Port Deposit and Rising Sun.

These labs are certified by Maryland to test drinking water for bacteria. For other tests, ask the lab what it is certified for. See the state's list.

Rules about testing

  • In Maryland, a home sale contract must have the buyer test the well for bacteria and nitrate before settlement. The buyer can give up the test in writing. Source
  • In Maryland, a new well cannot be used for drinking water until the county health department finds no bacteria in two tests and safe nitrate levels. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Maryland's 24 local health departments approve new wells for the state and may ask for more tests; their own rules were not all checked (2026-10-28).

Local help

For up-to-date local news about wells and water testing, check the Cecil County Health Department website.

Local health departments

From the Maryland Department of Health, Local Health Departments.

State programs

Products on this page

Test first, then fix only what your test finds. Certified labs near Cecil County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Arsenic, Uranium, Nitrate, Chloride, Sulfate, Sodium, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Iron, Manganese.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Iron, Manganese.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Arsenic, Lead, Uranium, Nitrate, Chloride, Sulfate, Sodium, Fluoride, Nitrite, PFAS.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Iron, Manganese.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Iron, Manganese, Hardness.

$4,905–$5,322

View product →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Cecil County can test your water.

Cecil County: Low RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Cecil County show:

  • Print or hand out the one-page fact sheet (PDF), with a code that opens this page.
  • Add this to your website: a free card about wells in Cecil County that updates itself.
  • Download the data behind this page for Maryland. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Cecil County, MD Wells: 40% of 104 Sites High in Iron," https://yourwaterreport.com/states/md/cecil-county/, data updated November 12, 2026.

Sources and dates

All 16 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Land Restoration Program Sites, Maryland Department of the Environment.
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
  • Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.

How we get our numbers · Download the data