Home › States › Kentucky › Iron
Iron in Kentucky Well Water
County by county
Every Kentucky county where wells were tested for iron. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For iron in every state we cover, see our Iron guide.
| County | High in it | Tested | How common | Confidence |
|---|---|---|---|---|
| Barren County | 71% | 7 wells | Very common | Low |
| Breckinridge County | 12% | 8 wells | Common | Low |
| Caldwell County | 40% | 5 wells | Very common | Low |
| Carroll County | 40% | 5 wells | Very common | Low |
| Christian County | 0% | 7 wells | Rare | Low |
| Estill County | 50% | 10 well sites | Very common | Low |
| Fleming County | 57% | 7 well sites | Very common | Low |
| Green County | 22% | 9 wells | Common | Low |
| Hardin County | 18% | 67 well sites | Common | Moderate |
| Hart County | 12% | 26 wells | Common | Moderate |
| Jefferson County | 86% | 35 wells | Very common | Moderate |
| Johnson County | 67% | 6 wells | Very common | Low |
| Larue County | 15% | 20 wells | Common | Moderate |
| Lawrence County | 60% | 5 wells | Very common | Low |
| Logan County | 5% | 19 wells | Sometimes found | Low |
| Martin County | 61% | 28 wells | Very common | Moderate |
| Meade County | 13% | 47 wells | Common | Moderate |
| Metcalfe County | 33% | 6 wells | Very common | Low |
| Ohio County | 25% | 8 wells | Very common | Low |
| Pike County | 59% | 34 wells | Very common | Moderate |
| Todd County | 0% | 11 wells | Rare | Low |
What it does
Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.
Where it comes from: It comes naturally from rock underground.
How to test for iron
A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for an iron test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.
- How to test your well: what to test for, mail-in kits and how to take a sample
- Every certified lab in Kentucky, from the state's own list
- What your test results mean, and what to do if a result is over the limit
- Iron in well water: our full guide
How to remove iron from well water
The right fix depends on how much iron there is. Small amounts can be removed by a water softener or a catalytic carbon filter. For most homes with orange or brown stains, an oxidizing filter (such as manganese greensand) is the usual choice. Very high levels need chlorine or another oxidizer, then a filter. Check your pH first: some iron filters only work when it is high enough.
| Iron and manganese level (in your test) | What usually works |
|---|---|
| Iron under 1 parts per million | Catalytic carbon filter (the water needs enough dissolved oxygen) |
| Iron under 5 parts per million, with hard water | Water softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first |
| Iron and manganese together, 3 to 10 parts per million | Oxidizing filter (manganese greensand), cleaned with potassium permanganate |
| Iron and manganese together, over 10 parts per million | Chlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter |
In what order
- Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
- Treat water where it enters the house, so every tap gets it.
- If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.
What doesn't fix it
- A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
- A softener isn't a filter for iron that has already turned orange: that iron fouls it.
Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.
If your own test shows iron over the limit, these are common fixes:
- Basic iSpring WGB32BM Whole House Iron & Manganese Filter · see price on Amazon · Iron and manganese reduction (iron up to 3 ppm)
- Recommended Matrixx InFusion Iron & Sulfur Eradication System · $3,295–$3,395 · NSF/ANSI 42
- Comprehensive Matrixx Ultimate Iron, Sulfur & Softening System · $4,905–$5,322 · NSF/ANSI 42/44
- Also works Matrixx Smart Metered Water Softener · $1,467–$1,775 · NSF/ANSI 44
A water softener handles small amounts; an iron filter handles more.
Got your test results?
Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.