Home › Idaho › Butte County

Butte County, ID Well Water: What to Test For

Data updated November 16, 2026. Covers private wells, not public water systems.

Moderate Risk
Some wells here exceed a health limit Based on 40 well sites tested Confidence: Moderate
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Uranium: Drinking water with uranium for many years can harm the kidneys and raises the risk of cancer. It has no color, taste or smell. Source

Fixes: If a test finds uranium over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Arsenic and nitrate look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Fixes: If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese. If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Butte County, make sure the test covers:

  • Uranium
  • Manganese
  • Bacteria and nitrate, every year

What tests found in Butte County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Uranium 40 well sites 2% Moderate Moderate risk

Water tests from agencies

1 of 40 well sites tested since 1973 were above the EPA limit of 30 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1973–2023

Water tests from agencies

0 of 12 wells tested since 2017 were above the EPA limit of 30 parts per billion.

Source: Idaho groundwater monitoring results (DEQ, IDWR, ISDA), 2017–2021

If a test finds uranium over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenic 27 wells 0% Moderate Low risk

Arsenic across Idaho →

Water tests from agencies

0 of 27 wells tested since 2005 were above the EPA limit of 10 parts per billion.

Source: Idaho groundwater monitoring results (DEQ, IDWR, ISDA), 2005–2021

Water tests from agencies

2 of 183 well sites tested since 1977 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1977–2023

USGS estimate

USGS estimates about a 10% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is the same as for Uranium (above).

Nitrate 27 wells 0% Moderate Low risk

Nitrate across Idaho →

Water tests from agencies

0 of 27 wells tested since 2005 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Idaho groundwater monitoring results (DEQ, IDWR, ISDA), 2005–2021

Water tests from agencies

2 of 155 well sites tested since 2000 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

USGS estimate

USGS predicts typical nitrate around 0.6 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Uranium (above).

Lead 63 well sites 0% Moderate Low risk

Water tests from agencies

0 of 63 well sites tested since 2000 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Everyday water problems
Hardness 236 well sites 92% High Very common

Hard Water across Idaho →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

218 of 236 well sites tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2023

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Manganese 185 well sites 11% High Common

Manganese across Idaho →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

20 of 185 well sites tested since 1971 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1971–2023

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

pH 177 well sites 5% High Sometimes found

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

9 of 177 well sites tested since 2000 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2024

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Iron 206 well sites 5% High Sometimes found
Sulfate 161 well sites 4% High Sometimes found
Sodium 171 well sites 0.6% High Rare

A salty taste at higher levels.

Water tests from agencies

1 of 171 well sites tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 33 of 171 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds high sodium, the usual fix is the same as for Uranium (above).

Chloride 175 well sites 0.6% High Rare

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

1 of 175 well sites tested since 2000 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2000–2023

If a test finds chloride over the taste or staining level, the usual fix is the same as for Uranium (above).

Other substances tested
Fluoride 236 well sites 0.4% High Low risk

Fluoride across Idaho →

Nitrite 156 well sites 0% High Low risk

Nitrate across Idaho →

PFASacross the county USGS estimate about 9% chance Low Not rated

USGS estimate

USGS estimates about a 9% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 770 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 43% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • Half of the private wells on record here are more than 140 feet deep, and the middle half are 100 to 180 feet deep (from 385 state well records). Source: Idaho Department of Water Resources well records.
  • About 10% of households on private wells here (about 77 homes) live within 1 mile of a Superfund site (the EPA's list of the most serious toxic waste sites) or an open case of a leaking underground fuel tank (EPA data; fuel tank records are from 2018 to 2021). That does not mean their wells are affected, but it is a good reason to test. Source: EPA records of toxic waste cleanup sites and leaking fuel tanks.
  • About 22% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 1 – highest potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
  • Since 2000, at least half of this county was in drought about 50% of the time, most recently with severe drought in 2026. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Butte County

The only way to know what is in your well is to test it. The certified labs nearest Butte County are listed below. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for uranium and manganese.

No certified lab is within 30 miles of Butte County. These are the closest. Many labs also take samples by mail: ask the lab for a kit.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Closest certified lab Teton Microbiology Laboratory

Idaho Falls

About 59 miles away

Certified for bacteria tests

Free or low-cost testing

Idaho's Department of Health and Welfare mails free well water test kits to Idaho homes with a private well. Ask for one online through Idaho Health Tools while funding lasts.

Details

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Butte County

Certified lab IAS EnviroChem Laboratory

Pocatello

About 69 miles away

Certified for bacteria tests

Every certified lab in Idaho

These labs serve well owners across Butte County, including Arco, Butte City and Moore.

These labs are certified by Idaho for the tests shown. Before you order, check the state's list for the tests you need. See the state's lists: IDHW Microbiological Analysis Certificates - Idaho Labs (bacteria tests); IDHW Inorganic Analysis Certificates - Idaho Labs (chemical tests); IDHW Drinking Water Lab Certification folder.

Free or low-cost testing

  • Idaho's Department of Health and Welfare mails free well water test kits to Idaho homes with a private well. Ask for one online through Idaho Health Tools while funding lasts. Source

Rules about testing

Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Southeastern Idaho Public Health website.

Local health departments

From the Idaho Department of Health and Welfare, Public Health Districts.

State programs

Products on this page

Test first, then fix only what your test finds. Free or low-cost testing and certified labs near Butte County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Uranium, Arsenic, Nitrate, Sulfate, Sodium, Chloride, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Uranium, Arsenic, Nitrate, Lead, Sulfate, Sodium, Chloride, Fluoride, Nitrite, PFAS.

See price on Amazon

View on Amazon →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Hardness, Manganese, Iron.

$4,905–$5,322

View product →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Butte County can test your water.

Butte County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Butte County show:

  • Add this to your website: a free card about wells in Butte County that updates itself.
  • Download the data behind this page for Idaho. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Butte County, ID Well Water: What to Test For," https://yourwaterreport.com/states/id/butte-county/, data updated November 16, 2026.

Sources and dates

All 16 data sources and when we retrieved them

Required credits

  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Nitrate Priority Areas (2020), Idaho Department of Environmental Quality.
  • Ground Water Data Layer (Idaho Ground Water Monitoring web map), Idaho Department of Environmental Quality, Idaho Department of Water Resources and Idaho State Department of Agriculture.
  • Wells, Idaho Department of Water Resources (Groundwater map service).
  • The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.

How we get our numbers · Download the data