Coliform Bacteria: Coliform bacteria usually don't make people sick themselves, but finding them means germs from the surface can get into your well. You can't see, smell or taste them. Source
Nitrate: Nitrate is most dangerous for babies under 6 months. It can keep their blood from carrying enough oxygen. Use other water for baby formula if your well is high. It has no color, taste or smell. Boiling does not remove it; it makes it stronger. Source
E. coli: E. coli comes from human or animal waste. It can cause diarrhea, cramps and vomiting, and is most dangerous for young children, older adults and people who are sick. Don't drink the water until it is fixed; boiling it for 1 minute makes it safe to drink. You can't see, smell or taste it. Source
Fixes: If a test finds coliform bacteria or E. coli, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System. If a test finds nitrate over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.
Arsenic looks unlikely here, but it has no taste or smell, so it is still worth a test.
Everyday problems
Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.
Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.
Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source
Sulfate: Sulfate makes water taste bitter and can upset the stomach (a laxative effect) in people who aren't used to it, especially babies. Source
28.2% of 2,574 samples that owners chose to send to a lab (2000–2020) were positive for coliform bacteria. These count tests, not wells: a well tested more than once counts each time.
If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).
4.7% of 2,175 samples that owners chose to send to a lab (2000–2020) were above the EPA limit of 10 parts per million (as nitrogen). These count tests, not wells: a well tested more than once counts each time.
USGS predicts typical nitrate around 0.1 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).
3.2% of 31 samples that owners chose to send to a lab (2000–2020) were positive for fecal coliform. These count tests, not wells: a well tested more than once counts each time.
0.8% of 122 samples that owners chose to send to a lab (2000–2020) were above the EPA limit of 10 parts per billion. These count tests, not wells: a well tested more than once counts each time.
USGS estimates about a 16% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.
0 of 15 wells tested since 2000 were above the World Health Organization's taste level of 200 parts per million; 10 of 15 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.
If a test finds fluoride over the limit, the usual fix is the same as for Nitrate (above).
PFASacross the countyUSGS estimateabout 9% chanceLowNot rated
USGS estimate
USGS estimates about a 9% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.
No households on private wells here live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). Source: EPA PFAS Analytic Tools.
If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).
If a test finds nitrite over the limit, the usual fix is the same as for Nitrate (above).
Radon1 well0 of 1LowToo few tests
Water tests from agencies
0 of 1 well tested since 2014 was above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).
How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.
Check your ZIP code
Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.
Half of the private wells on record here are more than 170 feet deep, and the middle half are 130 to 220 feet deep (from 1,156 state well records). Source: U.S. Groundwater Well Database.
Half of the private wells on record here were drilled by 2000 (from 1,119 state well records). Source: U.S. Groundwater Well Database.
About 5% of households on private wells here (about 180 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Iowa DNR contaminated sites and leaking tanks.
About 4% of this county sits on limestone and similar rock with cracks and caves (called karst), where bacteria and nitrate can travel quickly underground. Another 92% has this kind of rock buried deeper underground. Source: USGS map of limestone and similar rock.
Radon in indoor air (EPA map): Zone 1 – highest potential. Source: EPA Map of Radon Zones.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water, especially in the highest zone.
Radon in indoor air: about 55% of homes tested here (about 930 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
Farms here add more nitrogen (fertilizer and manure) per square mile than 99% of US counties (USGS 2017). Source: USGS county farm nitrogen estimates, 2017.Why it matters: Fertilizer and manure are the main sources of nitrate in well water.
Since 2000, at least half of this county was in drought about 22% of the time, most recently with severe drought in 2024. Drought lowers the water table, and shallow wells can run low or dry. Source: U.S. Drought Monitor.
These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.
Well water testing in Washington County
The only way to know what is in your well is to test it. The certified labs nearest Washington County are listed below. The closest is State Hygienic Laboratory - Coralville in Coralville, about 27 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate.
Order a test kitTap Score Advanced Well Water Test
A mail-in test from certified labs for more than 100 substances, with results in about a week.
Iowa tests private wells for free for bacteria, nitrate, arsenic and manganese. Call your county health department or county sanitarian to ask for a test.
These labs serve well owners across Washington County, including Ainsworth, Brighton, Coppock, Crawfordsville, Kalona, Riverside, Washington, Wellman and West Chester.
These labs are certified by Iowa to test drinking water. Ask the lab which tests it runs for private wells. Your county environmental health office may also offer free well tests. See the state's list.
Free or low-cost testing
Iowa tests private wells for free for bacteria, nitrate, arsenic and manganese. Call your county health department or county sanitarian to ask for a test. Source
Rules about testing
In Iowa, a new, rebuilt or repaired well must be tested by a certified lab for bacteria and nitrate 10 to 30 days after it is put into use, and the results go to the county. Source
Federal rules and home loans (6)
No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source
Local health codes in this state have not been reviewed yet.
Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.
Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.
Ready to test your well?
A mail-in kit or a certified lab near Washington County can test your water.
Download the data behind this page for Iowa. It is free to reuse if you credit YourWaterReport.
To cite this page: YourWaterReport, "Washington County, IA Wells: Bacteria in 28% of 2,574 Samples," https://yourwaterreport.com/states/ia/washington-county/, data updated November 15, 2026.
Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
Contaminated Sites and Leaking Underground Storage Tank sites, Iowa Department of Natural Resources (Facility Explorer).
Private Well Tracking System, Iowa Department of Natural Resources (Facility Explorer).
Private Well Water data, Iowa Public Health Tracking Portal, Iowa Department of Health and Human Services.
Private Well Water data, Iowa Public Health Tracking Portal, Iowa Department of Health and Human Services.
Private Well Water data, Iowa Public Health Tracking Portal, Iowa Department of Health and Human Services.
Private Well Water data, Iowa Public Health Tracking Portal, Iowa Department of Health and Human Services.
The U.S. Drought Monitor is jointly produced by the National Drought Mitigation Center at the University of Nebraska-Lincoln, the United States Department of Agriculture, and the National Oceanic and Atmospheric Administration. Data courtesy of NDMC.
Lin, C.-Y., A. Miller, M. Waqar, L. Marston (2024). A Database of Groundwater Wells in the United States, HydroShare, https://doi.org/10.4211/hs.8b02895f02c14dd1a749bcc5584a5c55. Licensed under CC BY 4.0.