Home › Connecticut › Hartford County

Hartford County, CT Wells: 32% of 256 Sites High in Manganese

Data updated November 15, 2026. Covers private wells, not public water systems.

Moderate Risk
Some wells here exceed a health limit Based on 74 wells tested Confidence: Moderate
Top concerns in this county Also test every year for bacteria and nitrate.
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

What this means for you

Your health

Uranium: Drinking water with uranium for many years can harm the kidneys and raises the risk of cancer. It has no color, taste or smell. Source

Fixes: If a test finds uranium over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. All products on this page.

Arsenic and nitrate look unlikely here, but they have no taste or smell, so they are still worth a test.

Everyday problems

Manganese: Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Hardness: Hard water leaves white scale on faucets, glasses and inside water heaters, and soap lathers poorly. It is not a health risk.

Iron: Iron leaves orange or brown stains on sinks, toilets and laundry, can make water taste metallic, and can clog pipes and fixtures. It is not a health risk.

Chloride: Chloride makes water taste salty and can corrode pipes, fixtures and water heaters.

pH: Water that is too acidic can corrode pipes, leave blue-green stains and pull lead and copper from plumbing into your water. Water that is too basic can taste bitter and leave scale. Source

Fixes: If a test finds manganese or iron over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System. If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener. It also handles small amounts of manganese and iron. If a test finds chloride over the taste or staining level, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System. If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System. All products on this page.

Find out what's in your well

The only way to know is to test. For a well in Hartford County, make sure the test covers:

  • Uranium
  • Manganese
  • Iron
  • Bacteria and nitrate, every year

What tests found in Hartford County

Over a health limitOver a taste or staining levelFound, under the limitUnder the limit or not foundComputer estimate
SubstanceTestedOver the limitResultsConfidenceRisk
Health concerns
Uranium 74 wells 5% Moderate Moderate risk

Uranium across Connecticut →

Water tests from agencies

4 of 74 wells tested since 2013 were above the EPA limit of 30 parts per billion.

Source: USGS study of 674 Connecticut private wells, 2013-2015, 2013–2015

Water tests from agencies

1 of 41 well sites tested since 1988 were above the EPA limit of 30 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1988–2017

If a test finds uranium over the limit, the usual fix is a reverse osmosis system, like the American Made Reverse Osmosis System ($599–$799).

Arsenic 76 wells 1% Moderate Low risk

Arsenic across Connecticut →

Water tests from agencies

1 of 76 wells tested since 2013 were above the EPA limit of 10 parts per billion.

Source: USGS study of 674 Connecticut private wells, 2013-2015, 2013–2015

Water tests from agencies

1 of 111 well sites tested since 1971 were above the EPA limit of 10 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1971–2017

USGS estimate

USGS estimates about a 10% chance that a private well here has arsenic above the EPA limit of 10 parts per billion.

Source: USGS arsenic estimate for private wells (computer model), 1970–2013

If a test finds arsenic over the limit, the usual fix is the same as for Uranium (above).

Nitrate 26 wells 0% Moderate Low risk

Water tests from agencies

0 of 26 wells tested since 2002 were above the EPA limit of 10 parts per million (as nitrogen).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

USGS estimate

USGS predicts typical nitrate around 0.8 parts per million (as nitrogen) in private wells here (compare the EPA limit of 10 parts per million (as nitrogen)).

Source: USGS nitrate estimate for private wells (computer model), 1988–2018

If a test finds nitrate over the limit, the usual fix is the same as for Uranium (above).

Lead 23 wells 0% Moderate Low risk

Water tests from agencies

0 of 23 wells tested since 2002 were above the EPA action level of 15 parts per billion.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds lead over the limit, the usual fix is a whole-house lead and PFAS filter, like the Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System ($1,669–$2,364). Running the tap before drinking helps.

Coliform Bacteria 2 wells 0 of 2 Low Too few tests

Water tests from agencies

0 of 2 wells tested since 2017 were positive for coliform bacteria.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2017

If a test finds coliform bacteria, find and fix how water gets in, then have the well disinfected (shock chlorination) and test again. If it comes back, the usual fix is a UV disinfection system, like the Pulsar Max Plus UV Disinfection System ($2,290–$2,540).

E. coli 2 wells 0 of 2 Low Too few tests
Everyday water problems
Manganese 256 well sites 32% High Very common

Manganese across Connecticut →

Black or brown staining and a bitter, metallic taste.

Water tests from agencies

83 of 256 well sites tested since 1970 were above the EPA taste-and-staining guideline of 0.05 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2017

USGS estimate

USGS estimates about an 18% chance that a private well here has manganese above the EPA health advisory level of 0.3 parts per million. At that level it can harm health, especially for babies.

Source: USGS manganese estimate for private wells (computer model), 1988–2018

If a test finds manganese over the taste or staining level, the usual fix is an iron and sulfur filter, like the Matrixx InFusion Iron & Sulfur Eradication System ($3,295–$3,395).

Hardness 255 well sites 29% High Very common

Hard Water across Connecticut →

Scale on fixtures and in water heaters, and soap that lathers poorly.

Water tests from agencies

74 of 255 well sites tested since 1970 were above the USGS level for hard water (120 parts per million).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 1970–2017

If a test finds hard water, the usual fix is a water softener, like the Matrixx Smart Metered Water Softener ($1,467–$1,775).

Iron 253 well sites 12% High Common

Iron across Connecticut →

Chloride 23 wells 17% Moderate Common

A salty taste, and it can speed up corrosion of pipes, fixtures and water heaters.

Water tests from agencies

4 of 23 wells tested since 2002 were above the EPA taste guideline of 250 parts per million.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds chloride over the taste or staining level, the usual fix is the same as for Uranium (above).

pH 31 wells 16% Moderate Common

Acidic water can corrode pipes and fixtures, and can dissolve lead and copper from plumbing into your water.

Water tests from agencies

5 of 31 wells tested since 2002 were outside the recommended pH range (6.5 to 8.5).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds acidic water (low pH), the usual fix is a pH balancing filter, like the Matrixx pH Balancing Backwashing Filter System ($1,395–$1,595).

Sodium 23 wells 9% Moderate Sometimes found

A salty taste at higher levels.

Water tests from agencies

2 of 23 wells tested since 2002 were above the World Health Organization's taste level of 200 parts per million; 13 of 23 were above the EPA guidance level of 20 parts per million for people on a very low-sodium diet.

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002–2017

If a test finds high sodium, the usual fix is the same as for Uranium (above).

Sulfate 23 wells 4% Moderate Sometimes found
Other substances tested
Fluoride 154 well sites 0% High Low risk
Nitrite 26 wells 0% Moderate Low risk
PFASacross the county USGS estimate about 69% chance Low Not rated

USGS estimate

USGS estimates about a 69% chance that a private well here has some PFAS ("forever chemicals") in it. This counts any amount found; most are far below EPA limits.

Source: USGS PFAS estimate for private wells (computer model), 2019–2022

Less than 1% of households on private wells here (about 37 homes) live within 1 mile of a known PFAS source (a site where PFAS was found, a reported PFAS release or firefighting-foam spill, or a PFAS maker, from EPA data). That does not mean their wells are affected, but it is a good reason to test. Source: EPA PFAS Analytic Tools.

If a test finds PFAS over the limit, the usual fix is the same as for Lead (above).

Radon 4 wells 0 of 4 Low Too few tests

Water tests from agencies

0 of 4 wells tested since 2002 were above the higher radon level the EPA proposed, 4,000 picocuries per liter (a measure of radioactivity; there is no federal limit).

Source: Well water tests from USGS, EPA and state agencies (Water Quality Portal), 2002

If a test finds radon over the limit, the usual fix is a whole-house carbon filter, like the Bodyguard Plus Whole House Backwashing Carbon Filter ($1,331–$2,073).

How we rate: High risk means 1 in 10 or more tested wells were over a health limit, or a USGS estimate of 20% or more. Moderate means 2 in 100 or more; Low, fewer. Confidence is High with 100 or more wells tested, Moderate with 20 to 99, and Low with fewer or a computer estimate only. With too few tests to judge, the county reads Risk Unknown. Stains, scale and taste are rated on their own and don't change the county's risk.

Check your ZIP code

Well water can differ from one part of a county to the next. Enter your ZIP code to see what the U.S. Geological Survey estimates for arsenic and nitrate in wells around you.

About wells here

  • About 20,700 households on private wells (USGS 2020). Source: USGS count of households on private wells, 2020.
  • 16% of people here rely on private wells (USGS 2015). Source: USGS water use estimates, 2015.
  • About 78% of households on private wells here (about 15,900 homes) live within 1 mile of a contaminated site on the state's or EPA's list. That does not mean their wells are affected, but it is a good reason to test. Source: Connecticut DEEP list of contaminated sites.
  • USGS maps no limestone and similar rock with cracks and caves (karst) in this county. Source: USGS map of limestone and similar rock.
  • Radon in indoor air (EPA map): Zone 3 – low potential. Source: EPA Map of Radon Zones.
  • Radon in indoor air: about 21% of homes tested here (about 3,700 homes, 2008 to 2017) had radon at or above the level where the EPA recommends fixing the home. These are homes whose owners chose to test. Source: Home radon tests from labs, CDC Tracking Network.Why it matters: Radon can get into well water too. Ask your lab about a radon test for water.
  • Since 2000, FEMA has declared 7 flood or hurricane disasters that included this county, most recently in 2021. Source: FEMA disaster declarations.Why it matters: Floodwater can carry bacteria and chemicals into a well. Test your water after any flood.

These are facts about the whole county. None of them means a particular well has a problem; only a test can tell you that.

Well water testing in Hartford County

The only way to know what is in your well is to test it. The certified labs nearest Hartford County are listed below. The closest is Envirotech Laboratory in Windsor, about 5 miles away. A mail-in kit is another option. Test every year for bacteria and nitrate, and here, also ask for uranium, manganese and iron.

Order a test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →
Nearest certified lab Envirotech Laboratory

Windsor

About 5 miles away · 860-688-7249

Free or low-cost testing

UConn Extension and the state health department test well water for PFAS for free in some Connecticut towns, and help pay for treatment if the water is over the state's limit. Check UConn's map to see if your home qualifies.

Details

Call a lab first to ask which tests it runs and how to get a sample bottle.

More certified labs near Hartford County

Certified lab Northeast Laboratories, Inc

Rocky Hill

About 11 miles away · 860-828-9787

Certified lab EMSL Analytical, Inc. - CT

Meriden

About 19 miles away · 203-284-5948

Certified lab Northwest Environmental Water Labs

Waterbury

About 23 miles away · 203-437-4110

Certified lab Environmental Monitoring Lab

Wallingford

About 24 miles away · 203-284-0555

Every certified lab in Connecticut

These labs serve well owners across Hartford County, including Blue Hills, Bristol, Broad Brook, Canton Valley, Collinsville, East Hartford, Glastonbury Center, Hartford, Hazardville, Kensington, Manchester, New Britain, Newington, North Granby, Plantsville, Salmon Brook, Sherwood Manor, Simsbury Center, Southwood Acres, Suffield Depot, Tariffville, Terramuggus, Thompsonville, Weatogue, West Hartford, West Simsbury, Wethersfield and Windsor Locks.

These Connecticut labs are certified to test drinking water and accept samples from private wells. For other tests, ask the lab what it is certified for. See the state's list.

Free or low-cost testing

  • UConn Extension and the state health department test well water for PFAS for free in some Connecticut towns, and help pay for treatment if the water is over the state's limit. Check UConn's map to see if your home qualifies. Source

Rules about testing

  • In Connecticut, if a water test at a rental property finds a substance over its limit, the owner must send each tenant a copy of the result within 48 hours. The law does not require the test itself. Source
  • In Connecticut, a new well must be tested by a lab for bacteria, nitrate, arsenic, uranium and other substances, and it cannot be used for drinking water until the local health department finds the results are within the limits. Source
Federal rules and home loans (6)
  • No federal law makes you test your own well. EPA and CDC recommend testing every year for bacteria, nitrate, pH and dissolved solids. Source
  • Fannie Mae and Freddie Mac loans don't require a well test. Your lender or local law may still require one. Source
  • If you buy with an FHA loan, the lender must confirm the well water is safe. A test is required for new homes and when there is a known problem. The results must be less than 180 days old. Source
  • With an FHA loan, a well that is closer to a septic system than HUD allows can still qualify if it meets local rules and a water test shows the water is safe. Source
  • If you buy with a USDA guaranteed loan and the home has a well, a health department or state-certified lab must test the water. The report must be less than 180 days old at closing. Refinances don't need a test. Source
  • If you buy with a VA loan and the home has a well, a neutral third party must test the water. You can't take the sample yourself. Results are good for 90 days. Source

Local health codes in this state have not been reviewed yet.

Local help

For up-to-date local news about wells and water testing, check the Bristol-Burlington Health District, Private Wells website.

Local health departments

From the Connecticut Department of Public Health, Local health departments.

State programs

Products on this page

Test first, then fix only what your test finds. Free or low-cost testing and certified labs near Hartford County are listed above.

Tests

Test kit Tap Score Advanced Well Water Test

A mail-in test from certified labs for more than 100 substances, with results in about a week.

Sold on Amazon · mailed to your home

Order a Tap Score Test →

Fixes, if a test finds a problem

Usual fix American Made Reverse Osmosis System

For Uranium, Arsenic, Nitrate, Chloride, Sodium, Sulfate, Fluoride, Nitrite.

$599–$799

View product →
Usual fix Pioneer Whole-House Lead, Cyst & PFOA/PFOS Removal System

For Lead, PFAS.

$1,669–$2,364

View product →
Usual fix Pulsar Max Plus UV Disinfection System

For Coliform Bacteria, E. coli.

$2,290–$2,540

View product →
Usual fix Matrixx InFusion Iron & Sulfur Eradication System

For Manganese, Iron.

$3,295–$3,395

View product →
Usual fix Matrixx Smart Metered Water Softener

For Hardness. Also an option for Manganese, Iron.

$1,467–$1,775

View product →
Usual fix Matrixx pH Balancing Backwashing Filter System

For pH.

$1,395–$1,595

View product →
Usual fix Bodyguard Plus Whole House Backwashing Carbon Filter

For Radon.

$1,331–$2,073

View product →
Another option APEC ROES-50 Essence 5-Stage Reverse Osmosis System

An option for Uranium, Arsenic, Nitrate, Lead, Chloride, Sodium, Sulfate, Fluoride, Nitrite, PFAS.

See price on Amazon

View on Amazon →
Another option HQUA-OWS-12 Whole House UV Water Purifier, 12 GPM

An option for Coliform Bacteria, E. coli.

See price on Amazon

View on Amazon →
Another option iSpring WGB32BM Whole House Iron & Manganese Filter

An option for Manganese, Iron.

See price on Amazon

View on Amazon →
Another option Matrixx Ultimate Iron, Sulfur & Softening System

An option for Manganese, Hardness, Iron.

$4,905–$5,322

View product →
Another option Eddy Electronic Water Descaler (salt-free)

An option for Hardness.

See price on Amazon

View on Amazon →
Another option US Water Upflow Calcite pH Neutralizer Filter

An option for pH.

$995–$1,195

View product →
Another option Oceanic Whole House Upflow Coconut Shell Carbon Filter

An option for Radon.

See price on Amazon

View on Amazon →
Another option Flexx Oxi-Gen Aeration System

An option for Radon.

$2,695–$3,195

View product →

Need help deciding?

Type in the numbers from your lab report and our free planner tells you what to fix first, which problems one system can handle together, and what you don't need to buy. Your numbers stay in your browser.

Make a treatment plan

Some of these are affiliate links. If you buy through them, we may earn a commission at no cost to you. As an Amazon Associate, we earn from qualifying purchases. Our picks do not affect what the data says.

Ready to test your well?

A mail-in kit or a certified lab near Hartford County can test your water.

Hartford County: Moderate RiskTest your well

For health departments, realtors and groups

Free ways to share what wells in Hartford County show:

  • Add this to your website: a free card about wells in Hartford County that updates itself.
  • Download the data behind this page for Connecticut. It is free to reuse if you credit YourWaterReport.
  • To cite this page: YourWaterReport, "Hartford County, CT Wells: 32% of 256 Sites High in Manganese," https://yourwaterreport.com/states/ct/hartford-county/, data updated November 15, 2026.

Sources and dates

All 16 data sources and when we retrieved them

Required credits

  • Radon Tests from Labs, CDC National Environmental Public Health Tracking Network.
  • List of Contaminated or Potentially Contaminated Sites, Connecticut DEEP (data.ct.gov xcxg-6jqp).
  • This product uses the Federal Emergency Management Agency's OpenFEMA API, but is not endorsed by FEMA. The Federal Government or FEMA cannot vouch for the data or analyses derived from these data after the data have been retrieved from the Agency's website(s). Data: OpenFEMA DisasterDeclarationsSummaries v2 (https://www.fema.gov/api/open/v2/DisasterDeclarationsSummaries).
  • Flanagan, S.M., and Brown, C.J., 2017, Inventory of water-quality and geologic-setting data from 674 private wells in Connecticut, 2013-2015: U.S. Geological Survey data release, https://doi.org/10.5066/F7K935P5.

How we get our numbers · Download the data