Home › States › Colorado › Manganese

Manganese in Colorado Well Water

Everyday problem 48 of 53 counties where it is common in tested wells Compared with the EPA taste-and-staining guideline of 0.05 parts per million
Highest Montrose County 66% of 77 well sites high in it
Testing strongly recommended Test your well →Mail-in kit sold on Amazon, results in about a weekFind a certified lab

County by county

Every Colorado county where wells were tested for manganese. Tap a column name to sort. Counties use different tests (some only test wells when homes are sold, and some state programs test wells people chose to send), so open a county to see which wells, years and limit. For manganese in every state we cover, see our Manganese guide.

CountyHigh in itTestedHow commonConfidence
Adams County21%110 well sitesCommonHigh
Alamosa County37%35 well sitesVery commonModerate
Arapahoe County42%166 well sitesVery commonHigh
Archuleta County60%25 well sitesVery commonModerate
Bent County80%5 wellsVery commonLow
Boulder County27%96 well sitesVery commonModerate
Chaffee County6%83 well sitesSometimes foundModerate
Clear Creek County19%16 well sitesCommonLow
Conejos County17%12 well sitesCommonLow
Crowley County14%22 wellsCommonModerate
Custer County5%37 wellsSometimes foundModerate
Delta County43%47 well sitesVery commonModerate
Denver County41%22 well sitesVery commonModerate
Douglas County27%157 wellsVery commonHigh
Eagle County15%82 well sitesCommonModerate
El Paso County26%453 well sitesVery commonHigh
Elbert County36%64 wellsVery commonModerate
Fremont County24%50 well sitesCommonModerate
Garfield County19%68 well sitesCommonModerate
Gilpin County70%10 well sitesVery commonLow
Grand County33%45 well sitesVery commonModerate
Gunnison County27%100 well sitesVery commonHigh
Hinsdale County23%13 wellsCommonLow
Huerfano County36%11 wellsVery commonLow
Jackson County50%12 well sitesVery commonLow
Jefferson County28%173 well sitesVery commonHigh
Kiowa County12%25 wellsCommonModerate
La Plata County24%204 well sitesCommonHigh
Lake County45%94 well sitesVery commonModerate
Larimer County19%57 wellsCommonModerate
Las Animas County48%58 wellsVery commonModerate
Logan County40%10 wellsVery commonLow
Mesa County36%62 well sitesVery commonModerate
Moffat County38%85 well sitesVery commonModerate
Montezuma County47%15 wellsVery commonLow
Montrose County66%77 well sitesVery commonModerate
Morgan County10%10 well sitesCommonLow
Otero County34%41 wellsVery commonModerate
Ouray County25%12 wellsVery commonLow
Park County22%159 well sitesCommonHigh
Pitkin County23%13 wellsCommonLow
Pueblo County48%156 well sitesVery commonHigh
Rio Blanco County20%141 well sitesCommonHigh
Rio Grande County0%11 well sitesRareLow
Routt County36%139 well sitesVery commonHigh
Saguache County33%36 well sitesVery commonModerate
San Juan County68%19 well sitesVery commonLow
San Miguel County50%18 wellsVery commonLow
Sedgwick County0%6 wellsRareLow
Summit County29%21 well sitesVery commonModerate
Teller County33%12 wellsVery commonLow
Weld County25%247 well sitesCommonHigh
Yuma County0%9 wellsRareLow

What it does

Manganese leaves black or brown stains and can make water taste bitter or metallic. At high levels it can also affect health, especially for babies, so use other water for baby formula if your well is high. Source

Where it comes from: It comes naturally from rock underground.

How to test for manganese

A county's results can't tell you what is in your own well; only a test can. Ask a certified lab for a manganese test, or use a mail-in kit that lists it. Each county page lists the certified labs nearest you.

How to remove manganese from well water

Manganese is removed the same ways as iron, and usually together with it. For most homes, an oxidizing filter (such as manganese greensand) is the usual choice; small amounts can be removed by a water softener. Manganese needs a higher pH than iron to be removed, so check your pH first. Until it's fixed, use other water for baby formula if your well is high.

Iron and manganese level (in your test)What usually works
Iron under 1 parts per millionCatalytic carbon filter (the water needs enough dissolved oxygen)
Iron under 5 parts per million, with hard waterWater softener, if the pH is above 6.7 and the water hasn't touched air or chlorine first
Iron and manganese together, 3 to 10 parts per millionOxidizing filter (manganese greensand), cleaned with potassium permanganate
Iron and manganese together, over 10 parts per millionChlorine (or potassium permanganate or hydrogen peroxide), a mixing tank, then a filter

In what order

  • Fix low pH first. Some iron filters need a pH of at least 6.8 to remove iron, and 7.5 to remove manganese.
  • Treat water where it enters the house, so every tap gets it.
  • If you also need UV for bacteria, it goes after the iron filter: iron coats the UV lamp's sleeve.

What doesn't fix it

  • A polyphosphate feeder keeps iron from staining but doesn't remove it, and it doesn't work for manganese.
  • A softener isn't a filter for iron that has already turned orange: that iron fouls it.

Sources: Penn State Extension, Iron and Manganese in Private Water Systems; Chautauqua County Health Department, Private Drinking Water Standard for Ultraviolet Disinfection. This is general information, not professional advice: check with a licensed water treatment installer or well contractor before you buy or install anything.

If your own test shows manganese over the limit, these are common fixes:

An oxidizing filter or a water softener can remove it.

Got your test results?

Type in the numbers from your lab report and get a plan: what to fix first, in what order, and what you don't need to buy. Free. Your numbers stay in your browser.

Make a treatment plan